41ERROR CODESGUIDE MESSAGE THAT APPEARS HOW TO REMOVE THE MESSAGE(switch the machine off and then on again tosolve the problem) Turn off and after 30 minutes turn the machine on againto restore normal operation.(call customer service center.) Problem that requires the intervention of the customerservice center.(insert drip tray) Insert drip tray under the brew group.(close coffee container) Close the coffee bean hopper cover to be able to brewany product.(add ground coffee) This message guides the user when, in the customizedproduct programming, the use of this type of coffee hasbeen chosen.(insert the brew unit) Insert the brew group in its place.(insert dreg drawer) Insert the dregsdrawer(empty dreg drawer) Remove the dregsdrawer and empty the grounds in anappropriate container.Note: The dregsdrawer must be emptied only when themachine requires it and when the machine is turned on.Emptying the drawer with the machine turned off doesnot allow the machine to register that it has beenemptied.(close the door) To be able to make the machine functional, the side doormust be closed.(refill water tank) The tank must be removed and refilled with freshdrinking water.(empty drip tray) Open the side door and empty the drip tray under thebrew group)(insert the milk container) Insert the milk container in the appropriate compartment(prime the circuit) Press on the display in order to proceed with manuallypriming the water circuit. The machine performs anautomatic attempt to prime the circuit. If this attemptdoes not perform correctly you must proceed with theseinstructions.(circuit priming failure) Contact the customer service center (toll free number) torequest assistance on how to resolve the problem.(the descaling cycle has not been completedcorrectly) Repeat the operation as described in the appropriatesection.(rinse milk) see page 13 and 27.(milk cleaning) see page 13 and 28.