Saeco RI9828/11 Operation And Maintenance Manual

Saeco RI9828/11 Operation And Maintenance Manual Manual pdf 30 page image

27MAIntenAnceMAIntenAnce settInGsIn this menu, adjustments can be made to clean/maintain all the machine’s internal circuits. Press“maintenance settings” on the main menu.This function enables the descaling cycle(the machine indicates how many liters can be dispensed before descaling).This function temporarily locks the touch screen (e.g. to clean the display). Toreactivate the display, press “unlock” in the lower right-hand corner and then(within two seconds) “unlock” in the upper left-hand corner (this messageappears only after pressing the previous icon).This function shows how many beverages have been brewed for every singletype of coffee since the last reset.This function enables the cleaning cycle of the brew group.cleaningcycleboilerdescalingcycle58lockdisplayproductcounters10cLeAnInG cYcLeThis function cleans the machine’s internal circuits used for brewing coffee.to rinse the brew group, simply clean with water as shown on page 33, on a regular basis. this tho-rough cleaning cycle (below) completes the maintenance process of the brew group. We recommendcarrying out this cycle on a monthly basis, or every 500 coffees, using saeco cleaning tablets, whichcan be purchased separately.Note: before performing this function make sure that:1. a large enough container is positioned under the spout;2. the appropriate tablet for cleaning the brew group has been inserted into thepre-ground bypass doser;3. the water tank is full.tHe cLeAnInG cYcLe cAnnot Be InteRRUPteD.A PeRson MUst Be PResent DURInG tHe oPeRAtIon.1.4.2. cleaning cyclenoHave you inserted the cleaning tabletand filled the water tank?yesAfter accessing the cleaning cyclemenu, make sure that the cleaningtablet has been inserted as shownabove. Press “yes”.Wait for the cleaning cycle tofinish (approximately 4 minutes).The machine will return to themain menu.