Saeco ROYAL OFFICE SUP 015V Operation And Maintenance

Also see for ROYAL OFFICE SUP 015V: Operation and maintenance

Saeco ROYAL OFFICE SUP 015V Operation And Maintenance Manual pdf 39 page image

English6 - INSTALLATIONWarningThe presence of nearby magnetic fields or electric devicesgenerating interference may cause malfunctioning in theelectronic control of the machine.ImportantDo not install the machine outdoors and in environmentswhere water or steam jets are used.ImportantWhen the temperature is approaching 0°C internal com-ponents containing water are subject to freezing.Do not use the machine in such conditions.To guarantee the correct functioning and durability of theappliance, follow the indications below:- room temperature: 10°C ÷ 40°C- maximum humidity : 90%.- make sure that the machine has not been tamperedwith during transport by verifying the package seal-ing;- verify the machine conditions and model inside thepackaging;- verify the content of the accessories envelope enclosedto the machine (see “6.1 List of supplied accessories”);- remove the machine from the original packaging thatshould be preserved for future use (e.g. change of lo-cation);- remove all the remaining packaging.ImportantDisposal of packaging should be carried out according toexisting laws and regulations and in line with environmen-tal considerations.6.1 List of supplied accessories• N. 1 brew group key (ref. 25 - Fig. 1).• N. 1 Instruction and Maintenance Manual• N. 1 cleaning brush for coffee grinder (ref. 23 - Fig. 1).• N. 1 water hardness test strip• N. 1 silicon pipe (ref. 26 - Fig. 1).6.2 PositioningFor correct functioning of the appliance follow the indica-tions below:- select an even surface- select a location that is sufficiently well-lit, clean andnear an easily reachable power source;- the distance from the walls must be as shown in Fig.3;- the maximum angle of inclination of the supportingsurface must not exceed 2°6.3 Electric connectionWarningThis operation must be performed by the maintenance tech-nician.The machine requires single-phase voltage according tothe value contained in the identification plate (2.4 Machineidentification).WarningThe socket should be easily accessible to the supply opera-tor, so that the machine can be easily unplugged whennecessary.Before connecting the machine check the following points:- the line voltage of the socket must correspond to thatindicated on the machine plate;- the electrical system must be in line with existing lawsand regulations and must have the load capacity indi-cated on the plate.When in doubt, request professional assistance to de-termine the characteristics of the electrical system.WarningThe use of extensions and adapters is forbidden.6.4 Applying the ‘Instructionsin brief’ adhesive plateTo apply the adhesive plate it is necessary to:- remove the top cover by inserting the key in the appro-priate lock;- remove the bean hopper cover;- unfasten the 2 screws of the bean hopper;- remove the bean hopper;- apply the adhesive plate in the front inside the bean hopper;- place the bean hopper back;- fasten the 2 screws of the bean hopper;- reinsert the bean hopper cover;- reinsert the top cover and lock it.ImportantThis plate must be applied only when the machine isequipped with a coiner (i.e. not free-of-charge)