Saeco SUP040RB Operation And Maintenance

Contents

Saeco SUP040RB Operation And Maintenance Manual pdf 80 page image

English980The machine immediately begins the coffee brewing phase.The "STOP COFFEE" message is displayed.Press the "Special Beverages" button when the desiredamount of coffee is reached in the cup. Now the"Cappuccino" button is programmed. Whenever it ispressed and released, the machine will brew the sameamount that has just been set.The length of all productscan be programmed withthis procedure, except"AMERICAN COFFEE" and"STEAM".When the programming procedure has been completed,enter the programming mode and reset the "SELFLEARNING" parameter to "OFF", in order to preventother users from accidentally changing the quantities.9.13 Using the Machine withCreditsThis option can be enabledor disabled by the serviceprovider.The machine is designed to manage beverage brewing bymeans of a credit system. The number of coffee-basedproducts brewed is limited to the number of creditsgranted by the service provider.When no credits remain, no more coffee-based productscan be brewed.Available credits are displayed whenever a product isbrewed.Hot water, hot milk andsteam dispensing is notsubject to credit; it canalways be performed,provided that there iswater in the tank.Each service provider decides independently how tomanage the granting and recharging of credits to allow themachine to be used.9.14 Emptying the CoffeeGrounds DrawerThis section applies only if theservice provider has enabledthe coffee groundmanagement option. If thecoffee ground managementoption is disabled, this sectiondoes not apply and you shouldask the service provider forinformation on how to disposeof coffee grounds.This operation must beperformed with the machineturned on and/or in stand-bymode.