Saeco Vienna plus sup 018M Operating Instructions Manual

Also see for Vienna Plus Sup 018M: Operating instructions Operating instructions Operating instructions Operating instructions

Contents

Saeco Vienna plus sup 018M Operating Instructions Manual Manual pdf 10 page image

10 SAFETY REGULATIONS - INSTALLATIONFire safetyIn case of fire, use Carbon Dioxide extinguishers(CO2 ). Do not use water or dry-powder extinguish-ers.Key to machine componentsCoffee bean hopperCoffee bean hopper coverGrinder adjustment knobCoffee dose adjustment knobMain power button (ON/OFF)Water tank coverWater tankGrounds drawerPower cableDrip tray + grillHeight-adjustable dispensing spoutSteam/hot water spout with pannarelloFront doorSteam knobCoffee Brew GroupCleaning brushControl panelCoffee dose per cup adjustment knobCoffee buttonTemperature ready / coffee function lightSteam function buttonSteam temperature lightAlarm lightMachine on light4 INSTALLATIONFor your own and for other people's safety, carefullyfollow the "Safety regulations" in section 3.4.1 PackagingThe original packaging has been designed to protectthe machine during transport.We recommend keeping the packaging for futuretransport.4.2 Preliminary operations• Remove the drip tray (10) with grill from the packag-ing.• Remove the coffee machine from the packagingand position it in a proper place in compliance withthe requirements described in the safety regulations(section 3).• Insert the drip tray (10) into the appropriate seat.Make sure that the drip tray, the grounds drawer(8) and the coffee Brew Group (15) are correctlyplaced and that the front door (13) is closed.• Fit the cover of the coffee bean hopper (2) onto thecoffee bean hopper (1). Keep the cleaning brush(16) to hand.• Before plugging in the machine, make sure that themain power button (5) is switched to -0-.If the red light (22) flashes when the machine is turnedon, it means that one of the above mentioned parts isnot placed correctly.Important note: Carefully read the explanationof all the warnings displayed by the machineto the user by means of the lights on the controlpanel (section 13).• (Fig. 25) - Lift and extract the water tank (7) andremove the cover (6). Rinse and fill it with freshwater taking care not to overfill it. Reinsert the watertank into the appropriate seat and replace the cover(6) on top of it.Always use only fresh, non-sparkling waterto fill the tank (7). Hot water or any other