Safco 1902 Assembly Instructions Manual

Top Panel 1 1902-01Bottom Panel 1 1902-05Screw Post 16 HFFMFBLeft Side Panel 1 1902-02Back Panel 1 1902-04Right Side Panel 1 1902-03Locking Cam 16 HFFMFCLeft Cabinet Rail 1 1902-15Small Screw 12 1902-23Right Cabinet Rail 1 1902-16Caster without Brake 2 8918-25Large Screw 16 8918-22Caster with Brake 2 8918-24Left Shelf Rail 1 1902-17Right Shelf Rail 1 1902-18Shelf 1 1902-06Lay out the D Left Side Panel, the E Back Panel,and the F Right Side Panel with the holes facing up.Insert three G Locking Cams into the large holes atthe top of each Side Panel with the arrows pointingtoward the OUTER edge, and three more into theholes at the bottom edges. Insert four Locking Camsinto the holes in the Back Panel.On the Left Side Panel, install a H Left Cabinet Rail(C-shaped end), using three I Small Screws each,into the set of holes near the top of the Side Panel,making sure that the rollers are facing theFRONT of the Panel and using thehole CLOSEST to the roller.ABCDEFGHIJKLMNOPMODELNUMBER 19021902-37: 1 of 2; Rev. 2; 1/04TOOLS REQUIRED: Phillips ScrewdriverDesk Side Mini WorkstationASSEMBLED UNITMODEL 1902For questions or concerns, please callSafco Consumer Hot Line 1-800-664-0042available Monday-Friday 8:00 AM to 4:30 PM (Central Time)(English-speaking operators)ASSEMBLY INSTRUCTIONSSafco Products Company, New Hope, MN 554281QQQQQQQQQQQQQQQQLETTERCODE DESCRIPTION QTY. PART NO.PARTS LISTSort and count your parts!QQQQQAQQQQQFQQQQQEQQQQQBQQQQQCQQQQQMQQQQQKQQQQQGQQQQQDQQQQQJQQQQQLWork on a smooth, clean surface.Locate the A Top Panel and B Bottom Panel andposition them with the six holes up. Insert six CScrew Posts into the holes, and tighten with a screw-driver (do not overtighten!)QQQQQ QQQQQQQQQQ QQQQQ2QQQQQJQQQQQHQQQQQOQQQQQNProperly identify thefour types of railsused!The Cabinet Rails (H,J) have C-shapedcross sections; rollersare at the FRONT, andthe Left Cabinet Rail isstamped “CL” near theroller, while the RightCabinet Rail isstamped “CR”.The Shelf Rails (N, O)have Z-shaped sec-tions; rollers are at theBACK, and they arestamped “DR” forRight and “DL” for Left.QQQQQAQQQQQBQQQQQDQQQQQEQQQQQCQQQQQIQQQQQGROLLERUSE THIS HOLEFOR FRONTSCREWQQQQQQQQQQCDo the same with the Right Side Panel,using the J Right Cabinet Rail.Screw two C Screw Posts into theremaining holes near the back edge ofeach Side Panel.QQQQQQQQQQQQQQQQQQQQQQQQQQQQQQROLLERQQQQQFQQQQQHQQQQQJQQQQQOQQQQQCQQQQQPQQQQQNQQQQQHQQQQQI

/ 4

Related manuals for Safco 1902