Safco 7752 Assembly Instructions Manual

Also see for 7752: Assembly instructions

7752-37: 2 of 2; Rev. 1: 12/01 Safco Products Company, New Hope, MN 55428From the left side, position the C Left Side Panelwith the tabs to the back and the flange side facing tothe right. Insert the tabs on the left side panel intothe tab slots on the Back Panel from the BACK side(see Inset B).5With the B Right Side Panel extended out at approximately 45degrees, insert one E Interior Right Side Panel (with tabs UP andrecessed side facing the side panel) behind the turned-in flanges onthe front and lower sides of the right side panel. Gently swing thefront of the side panel assembly in to form a 90 degree angle. Repeatfor the C Left Side Panel using the D Interior Left Side Panel.6Attach the F Top Panel (with the recessed side facing down) ontothe back and side panels, making sure the back flange on the toppanel slides in BETWEEN the back panel and the two inner rails(Inset C).7Position A Back Panel with the inner rails facingyou. Place the B Right Side Panel with the tabs tothe back and the flange side facing to the left. Insertthe tabs on the Right Side Panel into the tab slots onthe Back Panel from the BACK side (see Inset A).4INNER RAILQQQQQTAB &TAB SLOTBACK PANELQQQQQ QQQQQQQQQQBINNER RAILTAB &TAB SLOTInset AQQQQQCInset BTURNED-IN FLANGEQQQQQEINNER RAILSQQQQQQQQQQInset CBACK PANELBACK PANEL QQQQQBQQQQQFThe flanges on the Top Panel must beon the INNER side of the backand side panels.HINT: Do NOTpre-assemble theinterior panels tothe side panels.HINT: Do NOT try to slide the interiorpanels into the side panels withoutangling the side panels outward.INNER RAILSFLANGENOTE: Firmlygrasp the sideswith a helper andcarefully lift theassembled Riserinto place.QQQQQCQQQQQDQQQQQQQQQQ QQQQQSLOTS TO THE BACK

/ 2

Related manuals for Safco 7752