Safety 1st Visto User Manual

Contents

716916 - 16917 - 16918 - V isto 4 Wheel Stroller - 03 - 17STEP 2: REAR WHEEL ASSEMBLY• Slide rear wheels onto the frame of the stroller(Figure 2a).• Push the wheels in until you hear them lock intoplace. Listen for ‘click’.• To remove the rear wheel assembly, pull andhold the metal tab while removing rear wheelfrom the axle (Figure 2b). Repeat on the otherside.PUSHPULLPULLPUSHPUSHCLICK!CLICK!STEP 3: FRONT WHEEL ASSEMBLY• Lay the open stroller upside down with thehandle on the floor.• Align the shaft on the wheel with the hole inthe front leg and push in (Figure 3a). Listenfor a ‘click’.• Repeat on the other side.• To remove the front wheel assembly, locatethe metal pin behind the front tube and press itinwards while pulling the wheel off (Figure 3b).Assembling Stroller2a3a2b3b