Saijo Denki CVIA-80-CPF3 Service Manual

Also see for CVIA-100-CPF3: User manual

Saijo Denki CVIA-80-CPF3 Service Manual Manual pdf 52 page image

5 ADDRESS SETTING! CAUTION• Be sure to complete the electric wiring before setting the addresses.• It may take up to ten minutes (normally about five minutes) to address one refrigerant line automatically.• Running the unit is not required for address setting.• The addresses can be set manually.setting addresses using SW15 on the interface P.C. board on the header outdoor unitsetting addresses on the wired remote controller.Process1. Press Status On-screen will be shown "CONTROL"Saijo denki International co.,ltd. 45* When setting an address manually, the wired remote controller must temporarily bepaired with an indoor unit one-to-one. (when the system is organized for group operationand no Remote controller)On this unit, it is required to set the addresses of the indoor units before starting air conditioning. Set the addressesfollowing the steps below.• If you turn on the outdoor unit before turning on the indoor units, the CODE No. [E19] is indicated on the 7- segmentdisplay on the interface P.C. board of the outdoor unit until the indoor units are turned on. This is not a malfunction.• Settings on the outdoor unit are required for automatic addressing. (Address setting is not started simply by turningon the power.)Automatic addressing:Manual addressing:LED Control Status ButtonCan set the address of the indoor unit in the system automatically via the control board in the outdoor unit that is themaster.

/ 105

Related manuals for Saijo Denki CVIA-100-CPF3

Saijo Denki SCV-13-A-VTGP1 User Manual

Saijo Denki WI-CH2010-WSDC2-W-APS-INV Installation Manual

manualsdatabase

Your AI-powered manual search engine