Saivod STE84C User Manual

Contents

Saivod STE84C User Manual Manual pdf 21 page image

21 / 80 ENDryer / User ManualSelecting a Programme and Operating Your Machine“Ventilation”:- Illuminates when the programme ends.C Anti-creasing icon will light up at the end of theprogramme if anti-creasing function is active.5.14 Changing the programme afterthe programme has startedYou can use this feature to dry your laundry in adifferent program after your machine has started to run.For example;Press and hold the “Start/Pause/Cancel” button forabout 3 seconds to “Cancel” the programme in orderto select “Extra Dry” programme instead of “Iron Dry”programme. Select the “Extra Dry” program by rotatingthe program knob. Press “Start/Pause/Cancel” button tostart the program.C If you select a new programme by turning theprogramme selection knob while your machineis running, then the current program is cancelledand new programme information is displayed.5.15 Adding/removing laundry instandby modeIn order to add or take out laundry after the start-up ofthe programme;1. Press the “Start/Pause/Cancel” button to switch themachine to “Pause” mode. Drying process will stop.2. Open the door at Pause position and close it againafter adding or taking out laundry.3. Press “Start/Pause/Cancel” button to start theprogram.C Any laundry added after the drying process wasstarted may cause the already dried clothes inthe machine intermingle with wet clothes and theresult will be wet laundry after the drying processis over.C Laundry may be added or taken out as muchas desired during a drying process, but as thisprocess will interrupt drying continuously, it willextend the program duration and increase energyconsumption.Therefore, it is recommended to add laundrybefore the drying programme has started.C If you select a new programme by turning theprogramme selection knob while your machine isin standby, then the current program is cancelledand new programme information is displayed5.16 Child-proof lockThere is a child-proof lock to prevent any programmeinterruption due to the pressing of button while theprogramme is running. The loading door and all buttonexcept the “On/Off” button on the panel are deactivatedwhen the child-proof lock is active.In order to activate the child-proof lock, press onthe “audio warning” and “anti-creasing” buttonssimultaneously for 3 seconds.To start a new programme after the programme is overor to interrupt the programme, the child-proof lockshould be deactivated. Press the same buttons for 3sec. again to deactivate the child-proof lock.Lock symbol will appear on the screen when the child-proof lock is activated.