Salamander EMP.PSG.3 Operation And Maintenance Instructions
                   | |
9GAS SALAMANDER GRILLKasap Tip Dik BuzdolaplarıG INJECTOR CHANGE AND GAS SETTINGGAS VAPOR GRILL BURNER-INJECTOR CHANGE CHARTGasGroup GasPSG.3 PSG.4 PSG.5 PSG.6Injector ∅mmInjector ∅mmInjector ∅mmInjector ∅mm2 G20 1,40 1,40 1,40 1,40G25 1,40 1,40 1,40 1,403G30 30 1 1 1 150 1 1 1 1G31 37 1 1 1 150 1 1 1 1Change of Burner Injector;1. Rip off the injector at the entrance of burner with a suitable tool.2. Change A injector by paying attention to the datas at chart with suitable injector.(Image 1)3. Adjust the burner entrance setting (F) by loosening ‘B’ bolt and moving the valve toforward-back. (Image 2)4. Change C injector by paying attention to the datas at chart with suitable injector.Forthis it is enough to take off ‘D’ fitting and pull the gas pipe to down. (Image 3)Setting of Half Flame;1. Remove the tap button and set by turning tap half flame screw (K) with suitablescrewdriver.(Image 4) Turn it to left for transformation from LPG to N.G,turn it right fortransformation from N.G to LPG.2. After this process,operate the appliance and set it not to be deflated during transitionfrom full flame to half flame. |
manualsdatabase
Your AI-powered manual search engine