Salus Quantum WQ610 Quick Manual

Also see for Quantum WQ610: Full user manual Quick start guide

AUTOONQuick GuideThe SALUS Quantum WQ610 and WQ610RF thermostats are Boiler Plus compatiblethermostats, designed specifically to control central heating boilers and in the case of the RFversions, electrical panel heaters also. They have our new load compensation (ITLC) softwarewith Volt free switch and also Opentherm 4.0 connections, so you can choose the methodof control to suit your boiler / installation. Please note that the Boilers need to have anOpenTherm Association license to be fully compatible with WQ610 range (should you wishto connect to the OpenTherm terminals A and B). Please verify if this requirement is met withyour Boiler Manufacturer.Safety InformationUse in accordance with national and EU regulations. Use the device as intended,keeping it in a dry condition. Product is for indoor use only. Installation must becarried out by a qualified person in accordance with national and EU regulations.WARNING! Always ensure the AC mains power is switched off beforeinstalling or working on any components.This product complies with the essential requirements and other relevant provisions of thefollowing EU Directives: RED:2014/53/EU and RoHS 2011/65/EU. Full text of the EU Declarationof Conformity is available on: www.saluslegal.com WQ610RF: 2405-2480MHz; <14dBmWQ610 Thermostat WQ610RF ThermostatThermostat supply 230VAC Lithium Battery (Rechargable)Thermostat rating max 3 (1) A -OpenTherm terminals A / B -Outputs Voltage freeNO / COM terminals -Temperature range 5°C – 35°C 5°C – 35°CThermostat display accuracy 0.5°C 0.5°CErP control class Class V Class VRadio Frequency -- 2.4 GHzDimension [mm] 86 x 86 x 27 [mm] 86 x 86 x 11[mm]WQ610 ReceiverReceiver supply 230 V ACReceiver rating max 16 (5) AOpenTherm terminals A / BOutputs Voltage free NO / COM terminalsRadio frequency 2.4 GHzDimension [mm] 98 x 98 x 32[mm]1 2 3 45 67 81. MENU - enter the menu options, press and holdfor 3 seconds to return to main screen withoutsaving changes.2. DOWN - decrease the temperature and movethrough the menus.3. UP - increase the temperature and move throughthe menus.4. TICK - confirm changes and enter menus.Press and hold for 3 seconds to exit User Menuand save changes. Press and hold to cancelBOOST feature or temporary override (whilst innormal screen).5. ON - When in Manual Mode, ON willturn the boiler on.6. OFF - When in Manual Mode, OFFwill turn the boiler off.7. AUTO - Receiver operates in automaticmode according to the thermostat.8. MANUAL - Receiver output iscontrolled by the On/Off slide switch.WQ610 / WQ610RF Thermostat WQ610RF Receiver267910131211134581. Menu/Settings description2. Clock 24hr/AM/PM3. Temperature unit4. Heating indicator (icon is animatingwhen there is heating demand)5. RF Connection indicator6. Current Temperature / SetpointTemperature7. Holiday mode indicator8. Temporary override mode9. Settings icon10. Battery indicator11. Schedule program number12. Schedule mode icon13. Day indicator/ SET informationThe pairing between the thermostat and the receiver isalready done at the factory. However, should you needto re-pair the units then this can be done using the UserMenu. The link may also be tested from the User Menuto show pairing link has been successful. Before pairing,the receiver should be unplugged, then plugged back in.During the pairing process, the distance between theThermostat and the receiver should be at least 1m.1 2 3Turn the receiver OFF andON twice to reset. Ensurereceiver switches are ON andAUTO. Red LED should beflashing. Enter thermostatMENU and scroll down untilyou see the “PAIR WITHRECEIVER” option. Select YESto proceed with Pairing.Now your thermostat islooking for the receiver. A 10minute counter will appear onthe screen.Upon connecting to thereceiver, the thermostat willdisplay the message “PAIRINGSUCCESSFUL” and return tonormal operation afterwards.The red LED will stop flashingwhen the pairing is successful.1WQ610 / WQ610RFTechnical SpecificationLCD Icon DescriptionButton FunctionsWQ610RF: Pairing with the ReceiverIntroductionProduct Compliance

/ 2

Related manuals for Salus Quantum WQ610