JUMPER SETTINGSChanges to the jumper settings should only be made by the Engineer carrying out theinstallation or other qualified person.The installer should select the jumper positions required if changes need to be madeto the factory default settings. These jumpers are found on the rear of the ControlCentre.Jumper Function DefaultTemperature Movable jumper for ± 0.5 ºC spanSpan ± 0.5 ºC or ± 1.0 ºC span.RT300 INSTRUCTION MANUAL6RT300 100X115mm_Layout 1 23/08/2013 09:09 Page 6

frost protection

sleep mode

Salus RT300 Instruction Manual

Features

Backplate connections

JUMPER SETTINGS

Reviewing/setting set point temperature

Energy tip

Specification

RT300

lcd backlight