IntroductionA room thermostat simply switches the heating system on and off as necessary. It works by sensing the airtemperature, switching on the heating when the air temperature falls below the thermostat setting, andswitching it off once this set temperature has been reached.Turning a room thermostat to a higher setting will not make the room heat up any faster. How quickly the roomheats up depends on the design of the heating system, for example, the size of boiler and radiators. Neitherdoes the setting affect how quickly the room cools down. Turning a room thermostat to a lower setting willresult in the room being controlled at a lower temperature, and saves energy.The heating system will not work if a time switch or programmer has switched it off.The way to set and use your room thermostat is to find the lowest temperature setting that you are comfortablewith, and then leave it alone to do its job. The best way to do this is to set the room thermostat to a lowtemperature – say 18⁰C – and then turn it up by one degree each day until you are comfortable with thetemperature.You won’t have to adjust the thermostat further. Any adjustment above this setting will waste energy and costyou more money.If your heating system is a boiler with radiators, there will usually be only one room thermostat to control thewhole house. But you can have different temperatures in individual rooms by installing thermostatic radiatorvalves (TRVs) on individual radiators. If you don’t have TRVs, you should choose a temperature that is reasonablefor the whole house. If you do have TRVs, you can choose a slightly higher setting to make sure that even thecoldest room is comfortable, then prevent any overheating in other rooms by adjusting the TRVs.Room thermostats need a free flow of air to sense the temperature, so they must not be covered by curtainsor blocked by furniture. Nearby electric fires, televisions, wall or table lamps may prevent the thermostat fromworking properly.04 RT310RF Installation Manual