Salus RT500BC Instruction Manual

Contents

When operating in Frost Protection mode,the LCD display will show a reading of 5 °Cand also display the Frost Protectionindicator:When operating in Temporary Overridemode, the LCD display will show thetemporary set point temperature:To exit from the set point review, press any key except the UP or DOWN keys,or don’t press any keys for a few seconds – either of these actions will returnthe RT500 to Normal mode.TEMPORARY OVERRIDEIt is possible to temporarily override the current set temperature of theRT500. There are two ways to do this:• While reviewing set point temperature: Pressing the UP or DOWN keywill increase or decrease the set point temperature in 0.5 °C steps.• In normal mode press and hold either the up or down key to display theset point temperature. After a few seconds the RT500 will enter temporaryoverride mode and will allow increase or decrease of the set pointtemperature.RT500BC INSTRUCTION MANUAL 21