7 10AS20WRF/BRF Thermostat –Parameter Setup with Internet ConnectionIf the SG888ZB Gateway is used and is connected to the internet, the SALUS Smart Home applicationcan be used to set up the parameters. Alternatively, the parameters can be entered directly on theAS20WRF/BRF Thermostat. In either case, changes may take several minutes to take effect1 Select the thermostat iconon the screen2 Press the thermostat namein the top left corner3 Press the settings “gear” iconto access parametersTo access the AS20WRF/BRF parameters from the SALUS Smart Home Application, follow the steps below4 Scroll down to accessparameters5 Enter desired parameters seetable below for more info6 When parameters are set,scroll down and press, “Save”Section 7 Setting Device Parameters
