31Competence in Functional SafetyFunctional safety of globe valves, rotary plug valves, ball valves and butterfly valvesCompetence in Functional SafetyFunctional safety of globe valves, rotary plug valves, ball valves and butterfly valves31Checklist for testing safety equipmentOwner Created/Revised by:Operation: Plant: Subplant: Tag no.:Operating state during test:Prüfung: ShutdownPLC/DCS: Tester: Test date:Fail-safe position: SIL level: Architecture: Measuring principle:Manufacturer: Manufacturer model: Body number/serial number/stamp number/ID:Site of installation: Barrier medium: +H551-14E2Final element exists in the following SIL loopsSIF no.:Commissioning test: Proof test: Revision test:Final element test……. yearsLockout test……. years- An assessment of the process and safety hazards in the plant and installation is necessary.- Obtain a permit to work!- Wear suitable protection for the work! Observe explosion protection regulations!- The person performing the work is responsible for using the appropriate maintenance methods according to the recognized codesof practice as well as for using suitable and tested tools!- The person performing the work bears the compulsory insurance during the work!This includes, for example, the safeguarding of the workplace against unauthorized access or against accidental contact withunprotected electrical installations while temporarily leaving the workplace.- Take precautionary measures to protect the plant against external influences, such as weather or other damaging environmentalinfluences.Measuring equipment list:Type/Manufacturer/model: Serial number:Type/Manufacturer/model: Serial number:Type/Manufacturer/model: Serial number:Type/Manufacturer/model: Serial number:Type/Manufacturer/model: Serial number:Type/Manufacturer/model: Serial number:Tester 1: Tester 2: Test date: Signature: