18There are several ways to interface the MXP mixer to support a variety of appli-cations. Follow the cable diagrams below for connecting your mixer.Wiring GuideRCAPin 1 (shield)Pin 3 (cold)Sleeve (ground)Shield & Cold to SleeveTip (signal)Pin 2 (hot) Hot to TipMale XLRTip (signal)Sleeve (ground)Tip to TipSleeve to Sleeve Sleeve (ground)Tip (signal)Unbalanced ¼” ConnectorTip (+Signal)Ring (-Signal)Sleeve (ground)Tip to TipSleeve & Ring to Sleeve Sleeve (ground)Tip (signal)Balanced ¼” ConnectorBalanced ¼” ConnectorPin 1 (shield)Pin 3 (cold) Shield & Cold to SleevePin 2 (hot) Hot to TipMale XLRTip (+Signal)Ring (-Signal)Sleeve (ground)Unbalanced ¼” ConnectorPin 3 (cold) Shield & Cold to SleevePin 2 (hot) Hot to TipMale XLRTip (signal)Sleeve (ground)Pin 1 (shield)