3PowerStrip & PowerBrite FeaturesThe Samson PowerStrip PS10, PowerBrite PB10, and PowerBrite PB10Pro all utilizestate-of-the-art technology in power distribution and are engineered to the finestdetail. Here are some of their main features:• Eight switched, rear panel, IEC outlets that allow you to power an entire rack’sworth of gear from one source. In addition, an unswitched front panel convenienceoutlet is provided for temporary power needs (such as plugging in a guitaramplifier, soldering iron, etc.).• 3-point surge protection, spike clamping protection and RF filtering enables allconnected equipment to operate with maximum efficiency and minimal noise.• Front panel, re-settable, 10 amp circuit breaker protects all connected gear.• An independent dedicated switch with status light for powering the rear panelswitched outlets.• In the PowerBrite PB10 and PowerBrite PB10Pro, dual slide out cylinders containingLED light clusters that illuminate all gear underneath with cool, clear light. Inaddition, there is automatic switching for turning on the lamps.• In the PowerBrite PB10 and PB10Pro, a rear panel USB socket to use with theincluded LED gooseneck lamp providing rear rack lighting.• In the PowerBrite PB10Pro, a front panel voltmeter and ammeter that allow you tomonitor changes in the current drawn from both switched and unswitched outlets.• All units are designed to be mounted in the top slot of any standard 19” rack, takingonly a single rack space.• Rugged construction that makes the Samson PowerStrip PS10, PowerBritePB10, and PowerBrite PB10Pro eminently roadworthy and extremely reliably inpermanent installation.• Four IEC power cables included.