Samsung 2.004111218363e16 Instruction Manual

Also see for HT-DM550: Manual Instruction manual Instruction manual Instruction manual Instruction manual

DSP(Digital Signal Processor) Modes39 40DSP modes have been designed to simulate different acoustic environments.The sound heard in a hall, theater, pavilion, dance club, or live club consists of directand indirect sound —early reflections and reflections from behind.Direct sounds reach the listener directly without any reflection.Indirect sounds are delayed by the distance of the ceiling and walls.These indirect sounds are an important element of the acoustic surround effect.• The following DSP modes are provided with this unit:• These DSP modes can be used to add acoustic surround effects while reproducingstereo analog or linear PCM digital signals.• When one of the DSP modes is selected,the DSP indicator lights up on the display.Press the DSP/DPLII Mode button.DSP modes available according to the input signal format O : Possible, X : Not possibleProvides a clear vocal and simulates the feeling of a concert hall.HALLSimulates the feeling of a theater.THEATERSimulates the spacious feeling of a pavilion with a high ceiling.PAVILIONSimulates the sound of a dance club with a throbbing bass beat.DANCE CLUBSimulates the feeling of a live music club with a low ceiling.➠ ➠ ➠ ➠➠LIVE CLUB• This function works only in the STEREO Mode.To increase Effect levelAdjusting DSP Sound ParametersYou can fine-adjust DSP modes more minutely by changingthree parameters—room, liveness, and reverberation.To increase Effect level• The effect level can be set in steps from 1 to 4 EFFECT1 ➔EFFECT2 ➔ EFFECT3 ➔ OFF(DEFAULT).Each time the button is pressed the selection moves to the nexteffect.• The higher the number, the stronger the DSP surround effect will be.EffectPress the DSP/DPL II Effect button.What is a Effect?This sets the strength ofthe DSP mode.• This function works only in the DSP Mode.• This function works only in the DSP Mode.2 3Press the Sound Edit button.• Each time you press the button, theindication on the display changes as follows:1Press the DSP/DPL II Mode button.Press the Left/Right ( / ) button toadjust the DSP sound parameter.ROOM : To adjust the resonance based on the room size.The larger this value is, the more effective theresonance is (from 04 to 16 by 2 steps).LIVE (Liveness) : To adjust the liveness. The larger thisvalue is, the more liveness is obtained(from 04 to 16 by 2 steps).REVERB (Reverberation) : To adjust the reverberation timeof the sound (from 0.0 msec to1.6 msec by 0.2 msec steps).00 F 00 00 R 00 REAR SWNormalindication(canceled)REVERB LIVE ROOM