Samsung 2.0051111103302e16 Instruction Manual

Contents

61Setting the RRSS(Rear Reflecting Surround System)• By setting up the RRSS function just once, the speaker distance, channel level, and rear soundreflection effect are automatically set and create an optimal listening environment.• This function works only in DVD/CD mode.2143Connect the RRSSMicrophone to theRRSS input jack.Place the RRSSMicrophone at thelistening position.Press the RRSSbutton.When "REMOVE MIC"appears on the display,disconnect the RRSSMicrophone.• The RRSS button works as the RRSS setup function shown above if the RRSS Microphone is connected, and works as the rear soundreflection effect function if the microphone is removed.• If you are installing the system for the first time or if you have initialized the system, "NO MEASURED DATA" will appear on the displaywhen you press the RRSS button without connecting the RRSS Microphone.• During the RRSS setup, the output volume of the tone is fixed and you cannot use the volume control buttons to adjust the output level.• If you remove the RRSS Microphone during the RRSS setup, the setup will be cancelled.• Place the front and left speakers (L/R) toward the side walls so that the rear speaker sound is reflected against the walls.Note• A speaker tone will be heard oncefrom each speaker in the order ofL ➝ C ➝ R ➝ RS ➝ LS ➝ SW, andthen the newly set error tone will beheard again from L ➝ R.• An optimal listening environment willbe set up automatically.• It takes about 2 minutes to completethe RRSS setup.Tone OutputA piano sound will be heard and thesetup will be completed.