179 If you know the number of the channel to be stored, see thefollowing steps. Press the or button to select Channel. Press the + button. Press the or button to select C (Air channel) or S(Cable channel). Press the + button. Press the or button to select indicate the requirednumber.➣ You can also select the channel number directly bypressing the numeric buttons (0~9).➣ If no sound or abnormal sound, re-select the sound standardrequired.10 If you do not know the channel numbers, select Search bypressing the or button. Press the - or + button to start thesearch.Result: The tuner scans the frequency range until the firstchannel or the channel that you selected is receivedon your screen.11 To assign a programme number to a channel, select Prog.No. bypressing the or button. Press the - or + button to find thecorrect number.12 To store the channel and associated programme number, selectStore by pressing the or button. Press the - or + buttonto select OK.13 Repeat Steps 9 to 12 for each channel to be stored.☛ Channel mode P (Programme mode): When completing tuning, thebroadcasting stations in your area have been assigned toposition numbers from P00 to max P99. You can select achannel by entering the position number in this mode. C (Real channel mode): You can select a channel byentering the assigned number to each air broadcasting stationin this mode. S or Z (Cable channel mode): You can select a channel byentering the assigned number for each cable channel in thismode.Storing Channels Manually (continued)ENGSelect Adjust ExitManual storeColour system : AutoSound system : BGSearch : 46MHzChannel : C 1Prog.No. : P 3Store : ?Select Search ExitManual storeColour system : AutoSound system : BGSearch : 46MHzChannel : C 1Prog.No. : P 3Store : ?Select Adjust ExitManual storeColour system : AutoSound system : BGSearch : 46MHzChannel : C 1Prog.No. : P 3Store : ?Select Adjust ExitManual storeColour system : AutoSound system : BGSearch : 46MHzChannel : C 1Prog.No. : P 3Store : OK