Samsung 3 series User Manual

Also see for 3 SERIES: User manual User manual User manual Quick setup guide User manual

Contents

English - 2TroubleshootingIf you have any questions of TV, first refer to this list. If none of these troubleshooting tips apply, please visit ‘www.samsung.com’site, then click on Support or contact Call Centre on list of last page.Issue SolutionPicture QualityFirst of all, please perform the Picture Test to confirm that your TV is properly displayingtest image.Go to MENU - Support - Self Diagnosis - Picture TestIf the test image is properly displayed, the poor picture may caused by the source or signal.●TV image does not look as goodas it did in the store.If you have an analogue Cable/Set top box, upgrade to an Box. Use HDMI orComponent cables to deliver HD picture quality.Cable/Satellite subscriber : Try HD(High Definition) stations from channel line up.Antenna connection: Try HD stations after performing Auto programme.Many HD channels are upscaled from SD(Standard Definition) contents.Adjust Cable/Set top box video output resolution to 1080i or 720p.Confirm that you are watching the TV at the minimum distance recomended based onthe size and definition of the signal you are displaying.●●●N●●Picture is distorted : macroblock,small block, dots, pixelizationCompression of video contents may cause picture distortion especially on fast movingpictures such as sports and action movies.Low signal level or bad quality can cause picture distortion. This is not a TV issue.●●Wrong or missing colour withComponent connection.Make sure the Component cables are connected to the correct jacks. Incorrect or looseconnections may cause colour problems or the screen will be blank.●Poor colour or brightness. Adjust Picture options in the TV menu. (Picture mode, Colour, Brightness,Sharpness)Adjust Energy Saving option in Setup menu.Try picture reset to view the default picture setting. (Go to MENU - Picture - PictureReset)●●●Dotted line on the edge of screen. If picture size is set to Screen Fit, change to 16:.Change cable/set top box resolution.●●Picture is black and white with AV(Composite) input only.Connect video cable(Yellow) to Green jack of component input 1 of the TV.●Picture freezes or is distortedwhen changing channels orpicture is delayed.If connected with cable box, please try to reset cable box. (reconnect AC cord and waituntil cable box reboots. It may take up to 20 minutes.)Set output resolution of cable box to 1080i or 720p.●●Sound QualityFirst of all, please perform the Sound Test to confirm that your TV audio is properlyoperating.Go to MENU - Support - Self Diagnosis - Sound TestIf the audio is OK, the sound problem may caused by the source or signal.●No sound or sound is too low atmaximum volume.Please check the volume of external device connected to your TV then, adjust the TVvolume accordingly.●Picture is good but no sound. Set the Speaker Select option to TV speaker in the sound menu.Make sure audio cables from an external device are connected to correct audio inputjacks on the TV.Check connected device’s audio output option. (ex: You may need to change yourcable box’ audio option to HDMI when you have HDMI connected to your TV.)If you are using a DVI to HDMI cable, a separate audio cable is required.Deactivate SRS function if you are setting the volume over 30 value.Remove plug from headphone jack. (if available on your TV)●●●●●●Noise from speaker. Check cable connections. Make sure a video cable is not connected to an audio input.For Antenna/Cable connection, check signal strength. Low signal level may causesound distortion.●●¦