Samsung 300 User Manual

Also see for DIGIMAX 300: User manual

Contents

Samsung 300 User Manual Manual pdf 15 page image

English - 13Plug & Play FeatureWhen the TV is initially powered on, basic settings proceed automatically andsubsequently.1. Press the POWER button on the remote control.The message “Menu Language, Store Demo, Channels and Time will be set.” isdisplayed.Press the ENTER button, then “Select the language of the OSD” menuis automatically displayed.2. Press the or button to select language, then press the ENTER button.The message “Select ‘Home Use’ when installing this TV in your home.” isdisplayed.3. Press the or button to select “Store Demo” or “Home Use”, thenpress the ENTER button.The message “Select the antennas to memorize.” is displayed.We recommend setting the TV to “Home Use” mode for the best picture in yourhome environment.“Store Demo” mode is only intended for use in retail environments.If the unit is accidentally set to “Store Demo” mode and you want to return to“Home Use” (Standard): Press the Volume button on the TV. When the volumeOSD is displayed, press and hold the MENU button on the TV for 5 seconds.4. Press the or button to memorize the channels of the selected connection.Press the ENTER button to select “Start”.Air: “Air” antenna signal.Cable: “Cable” antenna signal.Auto: “Air” and “Cable” antenna signals.In Cable mode, you can select the correct signal source among STD, HRC, andIRC by pressing the , , or button, then press the ENTER button.If you have Digital cable, select the cable system signal source for both Analogand Digital. Contact your local cable company to identify the type of cablesystem that exists in your particular area.5. The TV will begin memorizing all of the available channels.To stop the search before it has finished, press the ENTER button with “Stop”selected.After all the available channels are stored, it starts to remove scrambledchannels (see page 28). The Auto program menu then reappears.Press the ENTER button when channel memorization is complete. Themessage “Set the Clock Mode.” is displayed.Turning the TV On and OffPress the POWER button on the remote control.You can also use the POWER button on the TV.OperationLanguage :Plug & PlayEnglishEspañolFrançaisMove EnterSelect the language of the OSD.Select ‘Home Use’ when installing this TV in yourhome.Plug & PlayStore Demo Home UseMove EnterSelect the antennas to memorize.StartAirPlug & PlayCableAutoStartStartMove Enter SkipPlug & PlayEnterMenu Language, Store Demo,Channels and Time will be set.StartPlug & Play50 %Enter SkipAuto Program in Progress.DTV Air : 02 Air : 11DTV Cable : 23 Cable : 21 Cable 50Auto ProgramStopPlug & Play77 %Enter SkipRemoving scrambled channel.DTV Cable 41Auto ProgramStopSelects a cable signal type for your location.Plug & PlayMove Enter SkipanalogStartSTDHRCIRCdigitalSTDHRCIRC