Getting Started 17To use Two-Touch Dialing for Speed Dial locations 10-99:1. Press the first digit.2. Press and hold the second digit for a few seconds. Thedisplay confirms that the number has been dialed when itshows “Calling”.To use Three-Touch Dialing for Speed Dial locations 100-300:1. Press the first digit.2. Press the second digit.3. Press and hold the third digit for a few seconds. The displayconfirms that the number has been dialed when it shows“Calling”.Note: Your phone also supports 1- 4 digit dialing. If you enter a numberusing the keypad without holding the last number and then press ,your phone will dial those digits. (For example, if you enterand press , it dials 211, not the number stored in memorylocation 211.Abbreviated DialingAbbreviated dialing allows you to enter a six-digit prefix forcommonly used phone numbers. When abbreviated dialing is On,you can enter the last four digits of any phone number that matchesthe six digit prefix, and the number is dialed using the prefix numberswith only the last four entered.To set up abbreviated dialing:1. Press for Main Menu.2. Press for Settings.3. Press for Others.4. Press for Abbrev. Dial.