English-4Connecting a DVD Player or Cable Box/Satellite receiver (Set-Top Box)via Component cablesTV Rear Panel1 Component Cable(Not supplied)DVD Player or Cable Box /Satellite receiver (Set-Top Box)2 Audio Cable (Not supplied)1 Connect a Component Cable betweenthe COMPONENT IN (1 or 2)[Y, PB , P R ] jacks on the TV and theCOMPONENT [Y, PB , P R ] jacks onthe DVD Player or Cable Box/Satellitereceiver (Set-Top Box).2 Connect Audio Cables between theCOMPONENT IN(1 or 2) [R-AUDIO-L]jacks on the TV and the AUDIO OUTjacks on the DVD Player or CableBox/Satellite receiver (Set-Top Box).Component video separates the videointo Y (Luminance (brightness)), Pb(Blue) and Pr (Red) for enhanced videoquality.Be sure to match the component videoand audio connections.For example, if connectinga Component video cable toCOMPONENT IN 1, connect the audiocable to COMPONENT IN 1 also.Each DVD Player or Cable Box/Satellite receiver (Set-Top Box) has adifferent back panel configuration.When connecting a DVD Player orCable Box/Satellite receiver (Set-TopBox), match the color of the connectionterminal to the cable.°°°Connecting a Camcorder1 Connect a Video Cable betweenthe AV IN 1 [Y/VIDEO] jack on theTV and the VIDEO OUT jack on thecamcorder.2 Connect Audio Cables between theAV IN 1[R-AUDIO-L] jacks on the TVand the AUDIO OUT jacks on thecamcorder.Each Camcorder has a different backpanel configuration.When connecting to AV IN 1, the colorof the AV IN 1 [Y/VIDEO] jack (Green)does not match the color of the videocable (Yellow).°°orCamcoderTV Rear Panel2 Audio Cable (Not supplied)1 Video Cable (Not supplied)