Samsung 4 SERIES User Manual

Also see for 5 Series: Quick setup guide Quick setup guide Quick setup guide Quick start guide User manual

Contents

The TV Signal Information is unavailable in the Self Diagnosis Test menu.• This function is only available with digital channels from an Aerial / RF / Coax connection.TV is tilted to the right or left side.• Remove the stand base from the TV and reassemble it.There are difficulties assembling the stand base.• Make sure the TV is placed on a flat surface. If you can not remove the screws from the TV, please use a magnetised screwdriver.The Broadcasting menu is grey out (unavailable).• The Broadcasting menu is only available when the TV source is selected.Your settings are lost after 5 minutes or every time the TV is turned off.• If the TV is in the Store Demo mode, it will reset audio and picture settings every 5 minutes. If you want to change thesettings from Store Demo mode to Home Use, press the SOURCE button to select TV mode, and go to MENU - Support -Use Mode.You have intermittent loss of audio or video.• Check the cable connections and reconnect them.• Loss of audio or video can be caused by using overly rigid or thick cables. Make sure the cables are flexible enough forlong term use. If mounting the TV to the wall, we recommend using cables with 90 degree connectors.You see small particles when you look closely at the edge of the frame of the TV.• This is part of the product’s design and is not a defect.The PIP menu is not available.• PIP functionality is only available when you are using a HDMI or components source.You turned the TV off 45 minutes ago, and it turned on again.• It is normal. The TV operates the OTA (Over The Aerial) function itself to upgrade firmware downloaded whilst yourwatching TV.There are recurrent picture/sound issues.• Check and change the signal/source.A reaction may occur between the rubber cushion pads on the base stand and the top finish of somefurniture.• To prevent this, use felt pads on any surface of the TV that comes in direct contact with furniture.The message “This file may not be playable properly.” appears.• This may appear because of high bit rate of content. Content generally will play but could experience some playabilityissue.You can keep your TV in optimum operating condition by upgrading to the latest firmware (www.samsumg.com → Support)by USB.This TFT LED panel uses a panel consisting of sub pixels which require sophisticated technology to produce. However, theremay be a few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.Some functions and pictures shown in this manual are available on specific models only.EnglishEnglish - 15UK5100B_BT_BN68-07346W-03_L08.indb 15 2016-07-11 �� 11:24:31