Connecting to a COMMON INTERFACE slot (Your TVviewing Card Slot)- Depending on the country and model.- Turn the TV off to connect or disconnect a CI card.Using the “CI or CI+ CARD”To watch paid channels, the “CI or CI+ CARD” must be inserted.• If you don’t insert the “CI or CI+ CARD”, some channels will display themessage “Scrambled Signal”.• The pairing information containing a telephone number, the “CI or CI+ CARD”ID the Host ID and other information will be displayed in about 2~3 minutes.If an error message is displayed, please contact your service provider.• When the configuration of channel information has finished, the message“Updating Completed” is displayed, indicating the channel list is updated.• NOTE - The image may differ depending onthe model.- You must obtain a “CI or CI+ CARD” from a local cable service provider.- When removing the “CI or CI+ CARD”, carefully pull it out with your hands since dropping the “CI or CI+ CARD” maycause damage to it.- Insert the “CI or CI+ CARD” in the direction marked on the card.- The location of the COMMON INTERFACE slot may be different depending on the model.- “CI or CI+ CARD” is not supported in some countries and regions; check with your authorised dealer.- If you have any problems, please contact a service provider.- Insert the “CI or CI+ CARD” that supports the current aerial settings. The screen will be distorted or will not be seen.English - 8UK5100B_XH_BN68-07346X-03_L09.indb 8 2016-07-11 오후 1:21:12