Samsung 4 Series User Manual

Also see for 5 Series: Quick setup guide Quick setup guide Quick setup guide Quick start guide User manual

■ Information: Display the information for a show or channel you havescheduled. You can also change the schedule Information.1. Select the Programmed List icon on the left side of the ChannelList screen, and then press the ENTER E button.2. On the Programmed List screen, select the show or channel entryyou want information for, and then press the TOOLS button. TheTools Menu appears.3. Select Information, and then press the ENTERE button. TheTimer Viewing Info screen appears.4. Select Change Info and press the ENTERE button to changeinformation, or select Close and press the ENTERE button toclose the Information screen.■ Select All / Deselect All: You can select or deselect all channels inthe channel list.❑ Other Channel Menu FunctionsChannel ModeLets you select the channel list displayed when you press the <CH>(Channel) button on your remote. For example, if you select FavoriteChannels, you will only see Favorite channels when you press the<CH> button.Fine TuneAnalog channels only.If the reception is clear, you do not have to fine tune the channel, asthis is done automatically during the search and store operation. If thesignal is weak or distorted, fine tune the channel manually.✎ Select the channel, and then select Fine Tune.✎ Fine tuned channels that have been saved are marked with anasterisk “*” on the right-hand side of the channel number in thechannel banner.✎ To reset fine-tuning, select the channel, select Fine Tune, and thenselect Reset on the Fine Tune screen.Setup MenuPlug & PlayLets you re-run the Plug & Play initial setup procedure.LanguageSet the menu language.✎ Choose between English, Español, and Français.❑ Setting the TimeTime✎ The time you set will appear when you press the INFO button.■ Clock: Set the clock so you can use the various timer features ofthe TV.✎ If you disconnect the power cord, you have to set the clock again.To set the clock, follow these steps:1. Select Setup >Time > Clock.2. Press ENTER E and select Auto or Manual, and then pressENTERE again.If you selected Auto:The TV will automatically download the correct time from a digitalchannel.y Select Time Zone, and then press the ENTERE button. Usethe▲/▼ buttons to select your Time Zone, and then pressENTERE.y Select DST (Daylight Savings Time), and then press ENTERE.Select On if you want to turn the DST adjustment on and offmanually. Select Off to turn off the DST adjustment. Select Auto ifyou want the TV to adjust to DST automatically. Press ENTEREwhen done.✎ DST and Time Zone function are only available when the ClockMode is set to Auto.If you selected Manual:The Clock Set screen appears. Use the ▲/▼ buttons to change thevalues in each field or use the number buttons to enter the valuesdirectly. Use the ◄/► buttons to move from field to field. When donewith all the fields, press ENTERE.✎ Available only when Clock Mode is set to Manual.■ Sleep Timer tAutomatically shuts off the TV after a preset period of time. (30, 60,90, 120, 150 and 180 minutes).✎ To cancel the Sleep Timer, select Off.Timer 1 / Timer 2 / Timer 3Turns the TV on and off automatically at times and days you select. Youcan set three different on/off timer settings.✎ You must set the clock first.■ On Time / Off Time: Set the hour, minute, am/pm, and Activate/Inactivate fields for On Time and Off Time. Use the ◄/► buttons tomove from field to field. Use the ▲/▼ buttons to change the valuesin each field. To activate the timer with the setting you have chosen,set the Activate/Inactivate field to Activate.■ Volume: Set the desired loudness.■ Contents: To select what will be turned on when the timer setting isactivated. You can set the TV to turn on a specific channel or playback contents such as photo or audio files. Use the ◄/► buttons tomove to the Contents field, and then press the ENTERE button.The Contents screen appears. Use the ◄/► buttons to move fromfield to field. Use the ▲/▼ buttons to change the values in each field.- TV/USB: Select TV or USB. The USB device must be connectedto your TV before you can select USB.- Antenna: Displays the current antenna source, Air or Cable.- Channel: If you have selected TV, select the desired channel.- Music/Photo: If you have selected USB, follow these steps toselect a folder containing MP3 (Music) or JPEG (Photo) files on theUSB device:✎ The maximum number of files the TV can display, including subfolders, in one folder of a USB storage device is 2000.✎ The media may not play smoothly if you use a USB device ratedlower than USB 2.0.1. Use the ◄/► buttons to move to the field under Music or thefield under Photo, and then press the ENTERE button. The TVdisplays a single folder (the Root folder) and the type or name of thedevice.- 6 -