Samsung 4 Series User Manual

Also see for Series 4+: User manual User manual User manual User manual User manual

English - 5Setup (Initial Setup)When the TV is initially powered on, a sequence of on-screenprompts will assist in configuring basic settings. Press thePOWERP button. Setup is available only when the source isset to TV.1. Use Mode: Selecting Store Demo or Home UsePress the ▲ or ▼ button, then press the ENTERE button.Select the Home Use mode. Store Demo mode is for retailenvironments.✎ When pressing TV controller, the function menu screenappears. Select the Menu(m) and press it more than 5seconds using the controller. The Store Demo mode isset. Cancel the Store Demo by selecting Source( ) andpressing it more than 5 seconds.✎ Store Demo is only for shop display. If you select it,several functions are not able to use. Please select HomeUse when you watch at home.2. Network Settings: Configure network settings.(Australia and New Zealand)1 Connect Samsung Wireless Lan Adaptor. Select the Nextbutton, then press the ENTERE button.✎ If you select the Skip button, you have to set network inthe Network Settings respectively. For more information,refer to “Connecting to the Network” in the e-Manual.2 Complete the network settings in accordance with yourdesired way.3. Country (Depending on the country): Selecting acountryPress the ▲ or ▼ button, then press the ENTERE button.Select the appropriate country.✎ After selecting the country in the country menu, somemodels may proceed with an additional option to setupthe pin number.4. Auto Tuning (Step 1): Selecting how you watch yourTV• I use an aerial cable.: Memorises all of the availablechannels using RF cable.• I use a cable or satellite service.: You don’t need to useAuto Tuning to find channels.5. Auto Tuning (Step 2): Selecting a search optionsSelect the desired broadcasting signal. Press the ◄/► button,then press the ENTERE button.✎ When selecting Digital & Analogue, Digital andAnalogue.For more information, refer to Channel →Auto Tuning.✎ Press the ENTERE button at any time to interrupt thememorisation process.6. Clock: Setting the Clock ModeSet the Clock Mode automatically or manually.Auto: Select the time zone where you are located. (Australiaonly)Manual: Allows you to manually set the current date and time.7. Setup CompletePress the ENTERE button.✎ The completed settings are displayed.If You Want to Reset This Feature...Select System - Setup (Initial Setup). Enter your 4 digit PINnumber. The default PIN number is “0-0-0-0”. If you want tochange the PIN number, use the Change PIN function.You should do Setup (MENU → System) again at homealthough you did in shop.✎ If you forget the PIN code, press the remote controlbuttons in the following sequence in Standby mode, whichresets the PIN to “0-0-0-0”: MUTE → 8 → 2 → 4 →POWER (on)