EnglishSecuring the TV to the WallCaution: Pulling, pushing, or climbing onto the TV may cause the TV to fall. In particular, ensure that your children donot hang over or destabilize the TV; doing so may cause the TV to tip over, resulting in serious injuries or death. Follow allsafety precautions provided on the included Safety Flyer. For added stability, install the anti-fall device for safety purposes,as follows.To avoid the TV from falling1. Put the screws into the clamps and firmly fasten them onto the wall.Confirm that the screws have been firmly installed onto the wall.✎ You may need additional material such as an anchor depending onthe type of wall.✎ Since the necessary clamps, screws, and string are not supplied,please purchase these additionally.2. Remove the screws from the centre back of the TV, put the screws intothe clamps, and then fasten the screws onto the TV again.3. Connect the clamps fixed onto the TV and the clamps fixed onto the wallwith a strong string and then tie the string tightly.✎ NOTE• Install the TV near to the wall so that it does not fall backwards.• It is safe to connect the string so that the clamps fixed on the wallare equal to or lower than the clamps fixed on the TV.• Untie the string before moving the TV.4. Verify all connections are properly secured. Periodically check connectionsfor any sign of fatigue for failure. If you have any doubt about the securityof your connections, contact a professional installer.Wall✎ The product colour and shape may varydepending on the model.Anti-theft Kensington LockThe Kensington Lock is not supplied by Samsung. It is a device used to physically fix the system when using it in a public place. Theappearance and locking method may differ from the illustration depending on the manufacturer. Refer to the manual provided with theKensington Lock for additional information on proper use.✎ Please find a “K” icon on the rear of the TV. A kensington slot is beside the “K” icon.✎ The position and colour may differ depending on the model.To lock the product, follow these steps:1. Wrap the Kensington lock cable around a large, stationary object such asdesk or chair.2. Slide the end of the cable with the lock attached through the looped end ofthe Kensington lock cable.3. Insert the locking device into the Kensington slot on the product.4. Lock the lock.✎ These are general instructions. For exact instructions, see the Usermanual supplied with the locking device.✎ The locking device has to be purchased separately.English - 15[UF40005000-XH]BN68-04784C-06L09.indb 15 2013-11-21 10:41:53