Samsung 400 Series User Manual

Also see for PN42A400C2D: Manual Safety instructions Quick setup guide User guide User manual

Contents

English - 16OperationTurning the TV On and OffPress the POWER button on the remote control.You can also use the POWER button on the TV.® It may take a while before you see a full picture.Plug & Play FeatureThe first time you turn on your new TV, choose your basic settings for language, input source and channels, andtime of day using the plug and play feature. The TV will store these settings in memory. Storing the channels inmemory will allow you to scan the stored channels rather than have to enter their digits each time you want tochange channels.When the TV is initially powered on, basic settings proceed automatically:1 Press the POWER button on the remote control.The message Menu language, Store Demo, Channels and Time will be set.is displayed.2 Press the ENTER button to enter the language.Press the ▲ or ▼ button to select language, then press the ENTER button.The message Select “Home Use” when installing this TV in your home. isautomatically displayed.® The Screen Saver is activated if there is no remote control key input forlonger than 1 minute while Plug & Play is running.® The Screen Saver is activated if there is no operating signal for longer than15 minutes.3 Press the ◄ or ► button to select Store Demo or Home Use, then press theENTER button.® We recommend setting the TV to Home Use mode for the best picture inyour home environment.® Store Demo mode is only intended for use in retail environments.® If the unit is accidentally set to Store Demo mode and you want to returnto Home Use (Standard) : Press the Volume button on the TV. When thevolume OSD is displayed, press and hold the MENU button on the TV for 5seconds.4 Press the ▲ or ▼ button to memorize the channels of the selected connection.Press the ENTER button to select Start.® Air: Air antenna signal.Cable: Cable antenna signal.Auto: Air and Cable antenna signals.® In Cable mode, you can select the correct analog signal source amongSTD, HRC, and IRC by pressing the ◄ or ► button, then press the ENTERbutton. If you have Digital cable, select the signal source for both Analog andDigital. Contact your local cable company to identify the type of cable systemthat exists in your particular area.Continued...Select “Home Use” when installingthis TV in your home.Plug & PlayStore Demo Home UseEnterMoveSelect the language of the OSD.Language :Plug & PlayEnglishEspañolFrançaisEnterMoveMenu language, Store Demo,Channels and Time will be set.iStartEnterPlug & PlaySelect the antenna to memorize.AirCableAutoPlug & PlayStartStartEnter SkipMoveStartPlug & PlayEnter SkipMoveSelects a cable signal type for your location.StartSTDHRCIRCAnalogSTDHRCIRCDigital