Samsung 4000 SERIES User Manual

Also see for 5000 Series: Specifications User manual Quick start guide User manual User manual

Contents

user manual

Connectionsy For the best picture and audio quality, connect digital devices usingan HDMI cable.y If you connect an external device to the TV that uses an older versionof HDMI, the video and audio may not work. If this occurs, ask themanufacturer of the device about the HDMI version and, if it is out ofdate, request an upgrade.y Be sure to purchase a certified HDMI cable. Otherwise, the picturemay not display or a connection error may occur.y PC/DVI AUDIO IN input is not supported.y For an HDMI to DVI cable connection, you must use the HDMI IN2 (DVI) port.y Connecting through the HDMI cable may not be supporteddepending on the PC.y If an HDMI to DVI cable is connected to the HDMI IN 2 (DVI) port,the audio does not work.y For Set-top box connection using HDMI cable, we highlyrecommend you to connect the HDMI IN 1 (STB) port.Getting StartedAccessoriesInput Cables (Sold Separately)y Audioy Composite (AV)y Componenty Coaxial (RF)y HDMIy HDMI-DVI✎ Make sure you have the correct cable before plugging it in. Illustrations of common plugs and jacks are shown below.Cable Plugs Ports/Jacks Do not plug in opposite or wrong direction. It coulddamage the TV port.HDMIUSBOpticalDo not plug cables in upside down. Be sure to check the orientationof the plug before plugging it in.TV Controller (Panel Key)The TV’s Controller, a small joy stick like button on the rear left side of the TV, lets you control the TV without the remote control.Remote control sensor TV ControllerThe image is drawn by facingthe front side of the TV.Function menu m R sPReturnSelecting the Media PlaySelecting a SourcePower OffSelecting the Menu✎ Exits the menu when pressing the controller more than 1 second.✎ When selecting the function by moving the controller to the up/down/left/right directions, be sure not to press the controller. If you press it first,you cannot operate it to move the up/down/left/right directions.Plug & Play (Initial Setup)When you turn the TV on for the first time, a sequence of screens and on-screen prompts will assist you in configuring the TV’s basic settings. Pressthe POWER button. Plug & Play is available only when the Input source is set to TV. Set the initial setup following instructions that the TV guides.✎ Connecting the power cord and antenna. (refer to ‘Connections’)Remote Control✎ This remote control has Braille points on the Power, Channel, and Volume buttons and can be used by visually impaired persons.Channel Menu❑ Seeing ChannelsChannel ListAdd, delete or set Favorite channels and use the program guide fordigital broadcasts. Select a channel in the All Channels, AddedChannels, Favorite or Programmed screen by pressing the ▲/▼buttons, and pressing the ENTERE button. Then you can watch theselected channel.■ All Channels: Shows all currently available channels.■ Added Channels: Shows all added channels.■ * Favorite: Shows all favorite channels.■ Programmed: Shows all currently reserved programs.✎ Using the remote control buttons with the Channel Listx Green (Zoom): Enlarges or shrinks a channel number.x Yellow (Select): Selects multiple channel lists. Select desiredchannels and press the Yellow button to set all the selectedchannels at the same time. The c mark appears to the left ofthe selected channels.x T (Tools): Displays the Channel List option menu. (The Optionsmenus may differ depending on the situation.)Channel Status Display iconsy c: A channel selected.y * : A channel set as a Favorite.y ) : A reserved program.y ( : A program currently being broadcast.❑ Memorizing channelsAntenna (Switch to Cable / Switch to Air t)Before your television can begin memorizing the available channels, youmust specify the type of signal source that is connected to the TV (i.e.an Air or a Cable system).Auto Program✎ When selecting the Cable TV system: Selects the cable system.STD, HRC and IRC identify various types of cable TV systems.Contact your local cable company to identify the type of cablesystem that exists in your particular area. At this point, the signalsource has been selected.✎ After all the available channels are stored, it starts to removescrambled channels. The Auto Program menu then reappears.✎ Press the ENTERE button to stop the channel store during AutoProgram.How to Stop Auto Programming1. Press the ENTERE button.2. A message will ask Stop Auto Program?. Select Yes by pressingthe ◄ or ► button.3. Press the ENTERE button.❑ Other FeaturesClear Scrambled ChannelThis function filters out scrambled channels after Auto Program iscompleted. This process may take up to 20~30 minutes.✎ Press the ENTERE button to stop the Clear ScrambledChannel.✎ This function is only available in Cable mode.Channel ListChannel List Option MenuO Channel List → tSet each channel using the Channel List menu options. Option menuitems may differ depending on the channel status.■ Add / Delete: Delete or add a channel to display the channels youwant.✎ All deleted channels will be shown on the All Channels menu.✎ A gray-colored channel indicates the channel has been deleted.✎ The Add menu only appears for deleted channels.✎ Delete a channel from the Added Channels or Favorite menu inthe same manner.■ Add to Favorite / Delete from Favorite t: Set channels youwatch frequently as Favorites.■ Timer Viewing: You can set a desired channel to be displayedautomatically at the set time; even when you are watching anotherchannel. Set the current time first to use this function.✎ Only memorized channels can be reserved.✎ Reserved programs will be displayed in the Programmed menu.✎ When a digital channel is selected, press the ► (Next Program)button to view the digital program. If you select the ENTERE(Schedule) button on the next program, you can set TimerViewing directly.■ Channel Name Edit: (analog channels only) Assign your ownchannel name.■ Select All: Select all the channels in the channel list.■ Deselect All: Deselect all the selected channels.✎ You can only select Deselect All when one or more channelsare selected.■ Auto Program: Scans for a channel automatically and stores in theTV.Programmed(in Channel List)O Channel List → Programmed → tYou can view, modify or delete a show you have reserved to watch.■ Change Info: Change a show you have reserved to watch.■ Cancel Schedules: Cancel a show you have reserved to watch.■ Information: Display a show you have reserved to watch. (You canalso change the reservation Information.)■ Select All / Deselect All: You can select or deselect all channels inthe channel list.Channel ModeChange the channel mode directly between Added Channels andFavorite Channels.✎ The Favorite Channels is enabled only when you set Add toFavorite.Fine Tune(analog channels only)If the reception is clear, you do not have to fine tune the channel, asthis is done automatically during the search and store operation. If thesignal is weak or distorted, fine tune the channel manually.✎ Fine tuned channels that have been saved are marked with anasterisk “*” on the right-hand side of the channel number in thechannel banner.✎ To reset the fine-tuning, select Reset.Picture MenuMode tSelect your preferred picture type.✎ When connecting a PC, you can only select Entertain andStandard.■ Dynamic: Suitable for a bright room.■ Standard: Suitable for a normal environment.■ Movie: Suitable for watching movies in a dark room.■ Entertain: Suitable for watching movies and games.✎ Only available when connecting a PC.Backlight / Contrast / Brightness / Sharpness /Color / Tint (G/R)Your television has several setting options for picture quality control.✎ When connecting a PC, you can only make changes to Backlight,Contrast, Brightness and Sharpness.Advanced Settings(available in Standard / Movie mode)Compared to previous models, new Samsung TVs have a more precisepicture.✎ When connecting a PC, you can only make changes to Gamma andWhite Balance.■ Dynamic Contrast: Adjusts the screen contrast.■ Black Tone: Selects the black level to adjust the screen depth.■ Flesh Tone: Emphasize pink “flesh tone”.■ Color Space: Adjusts the range of colors available to create theimage.■ White Balance: Adjusts the color temperature for a more naturalpicture.R-Offset / G-Offset / B-Offset: Adjusts each color’s (red, green, blue)darkness.R-Gain / G-Gain / B-Gain: Adjusts each color’s (red, green, blue)brightness.Reset: Resets the White Balance to it’s default settings.■ Gamma: Adjusts the primary color intensity.■ Motion Lighting: Reduce power consumption by brightness controladapted motion.✎ Available in Standard mode only.Picture Options✎ When connecting a PC, you can only make changes to the ColorTone, Size, and HDMI Black Level.■ Color Tone✎ Warm1 or Warm2 will be deactivated when the picture mode isDynamic.■ Size: Your cable box/satellite receiver may have its own set of screensizes as well. However, we highly recommend you use 16:9 modemost of the time.16:9: Sets the picture to 16:9 wide mode.Zoom1: Use for moderate magnification.Zoom2: Use for a stronger magnification.Wide Fit: Enlarges the aspect ratio of the picture to fit the entirescreen.4:3: Sets the picture to basic (4:3) mode.✎ Do not watch in 4:3 format for a long time. Traces of bordersdisplayed on the left, right and center of the screen may causeimage retention (screen burn) which are not covered by thewarranty.Screen Fit: (DTV) Displays the full image without any cut-off whenHDMI (720p / 1080i / 1080p) or Component (1080i / 1080p) signalsare inputted.✎ HD (High Definition): 16:9 - 1080i/1080p (1920x1080), 720p(1280x720)✎ Settings can be adjusted and stored for each external device youhave connected to an input on the TV.✎ Picture Sizes available by Input Source:Input Source Picture SizeATV, AV, Component (480i, 480p) 16:9, Zoom1, Zoom2, 4:3DTV(1080i, 1080p), Component(1080i, 1080p), HDMI (720p, 1080i,1080p)16:9, Wide Fit, 4:3, Screen Fit■ Digital Clean View: If the broadcast signal received by your TV isweak, you can activate the Digital Clean View feature to reduce anystatic and ghosting that may appear on the screen.✎ When the signal is weak, try other options until the best pictureis displayed.■ MPEG Noise Filter: Reduces MPEG noise to provide improvedpicture quality.■ HDMI Black Level: Selects the black level on the screen to adjust thescreen depth.✎ Available only in HDMI mode (RGB signals).■ Film Mode: Sets the TV to automatically sense and process filmsignals from all sources and adjusts the picture for optimum quality.✎ Available in ATV, DTV(interlace), AV, COMPONENT (480i / 1080i)and HDMI (480i / 1080i).■ LED Clear Motion: Removes drag from fast scenes with a lot ofmovement to provide a clear picture.Picture ResetResets your current picture mode to its default settings.■ Reset Picture Mode: Returns all picture values in the currentlyselected mode to the default settings.Sound MenuMode t■ Standard: Selects the normal sound mode.■ Music: Emphasizes music over voices.■ Movie: Provides the best sound for movies.■ Clear Voice: Emphasizes voices over other sounds.■ Amplify: Increase the intensity of high-frequency sounds to allow abetter listening experience for the hearing impaired.Equalizer(standard sound mode only)■ Balance L/R: Adjusts the balance between the right and left speaker.■ 100Hz / 300Hz / 1kHz / 3kHz / 10kHz (Bandwidth Adjustment):Adjusts the level of specific bandwidth frequencies.■ Reset: Resets the equalizer to its default settings.DTS TruSurround(standard sound mode only)DTS TruSurround is a patented DTS technology that solves the problemof playing 5.1 multichannel content over two speakers. TruSurrounddelivers a compelling, virtual surround sound experience through anytwo-speaker playback system, including internal television speakers. It isfully compatible with all multichannel formats.Preferred Language(digital channels only)Digital-TV broadcasts are capable of simultaneous transmission of manyaudio tracks (for example, simultaneous translations of the program intoforeign languages).✎ You can only select a language from among the ones beingbroadcasted.Multi-Track Sound(analog channels only)■ Mono: Choose for channels that are broadcasting in mono or if youare having difficulty receiving a stereo signal.■ Stereo: Choose for channels that are broadcasting in stereo.■ SAP: Choose to listen to the Separate Audio Program, which isusually a foreign-language translation.✎ Depending on the program being broadcast, you can listen toMono, Stereo or SAP.Auto VolumeBecause each broadcasting station has its own signal conditions, thevolume may fluctuate each time channel is changed. This feature letsyou automatically adjust the volume of the desired channel by loweringthe sound output when the modulation signal is high or by raising thesound output when the modulation signal is low.SPDIF OutputThe SPDIF (Sony Philips Digital InterFace) outputs an uncompresseddigital audio signal when you connect the digital audio jack on the backof the TV to a digital audio in jack on a receiver or home theater.■ Audio Format: You can select the Digital Audio output (SPDIF)format. The available Digital Audio output (SPDIF) format may differdepending on the input source.✎ By connecting the TV to a receiver or home theater with DolbyDigital and 5.1ch speakers and selecting Dolby Digital, you canmaximize your interactive 3D sound experience.■ Audio Delay: Lets you correct timing mismatches between the audiotrack and the video when you are watching the TV and listening todigital audio output from the TV through an external device such asan AV receiver. When you select Audio Delay, a slider appears. Usethe left and right arrow buttons to adjust the slider. Press ENTEREwhen done (0ms ~ 250ms).Speaker SelectIf you are listening to the sound track of a broadcast or movie through anexternal receiver, you may hear a sound echo caused by the difference indecoding speed between the TV’s speakers and the speakers attachedto your audio receiver. If this occurs, set the TV to External Speaker.✎ When you set Speaker Select to External Speaker, the TV’sspeakers are turned off. You will hear sound through the externalspeakers only. When you set Speaker Select to TV Speakerboth the TV’s speakers and the external speakers are on. You willhear sound through both.✎ When Speaker Select is set to External Speaker, the VOLUMEand MUTE buttons will not operate and the sound settings willbe limited.✎ If there is no video signal, both the TV’s speakers and the externalspeakers will be mute.Visual Impaired(digital channels only)Adds verbal description to the main audio to help the visually impaired.Sound Reset■ Reset All: Resets all sound settings to the factory defaults.Setup MenuLanguageSet the menu language.✎ Choose between English, Español, and Français.❑ Setting the TimeTime✎ The current time will appear every time you press the INFO button.■ Clock: Setting the clock is for using various timer features of the TV.✎ If you disconnect the power cord, you have to set the clock again.Clock Mode: Set the current time manually or automatically.Clock Set: Set the Month, Day, Year, Hour, Minute and am/pm.✎ Available only when Clock Mode is set to Manual.Time Zone: Select your time zone.DST: (Daylight Saving Time) Switches the DST (Daylight Saving Time)function on or off.✎ DST and Time Zone function is only available when the ClockMode is set to Auto.■ Sleep Timer tAutomatically shuts off the TV after a preset period of time. (30, 60,90, 120, 150 and 180 minutes).✎ To cancel the Sleep Timer, select Off.Timer 1 / Timer 2 / Timer 3Three different on / off timer settings can be made. You must set theclock first.■ On Time / Off Time: Set the hour, minute, am/pm and Activate /Inactivate. (To activate the timer with the setting you have chosen, setto Activate.)■ Volume: Set the desired volume level.■ Contents: When the On Time is activated, you can turn on a specificchannel or play back contents such as photo or audio files.− TV/USB: Select TV or USB. (Make sure that an USB device isconnected to your TV.)− Antenna: Displays the current antenna source.− Channel: Select the desired channel.− Music/Photo: Select the folder containing MP3/JPEG files on theUSB device.✎ The maximum displayed number of files, including sub folders, inone folder of USB storage device is 2000.✎ The media may not be playing smoothly when using the devicelower than USB 2.0.■ Repeat: Select Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun orManual to set at you convenience. If you select Manual, you can setup the day you want to activate the timer.❑ Other FeaturesGame ModeWhen connecting to a game console such as PlayStation™ or Xbox™,you can enjoy a more realistic gaming experience by selecting the gamemenu.✎ Precautions and limitations for game modex To disconnect the game console and connect another externaldevice, set Game Mode to Off in the setup menu.x If you display the TV menu in Game Mode, the screen shakesslightly.x Game Mode is not available when the input source is set to TV.x After connecting the game console, set Game Mode to On.Unfortunately, you may notice reduced picture quality.LED TVuser manual© 2013 Samsung Electronics Co., Ltd. All rights reserved.Changing the Input SourceSource ListUse to select TV or an external input source such as a DVD player / Blu-ray player / cable box / STB satellite receiver.1. Press the SOURCE button.2. Select a desired external input source.■ TV / AV / Component / HDMI1 / HDMI2/DVI✎ You can only choose external devices that are connected to the TV.In the Source List, connected inputs will be highlighted.How to use Edit NameEdit Name lets you associate a device name to an input source. Toaccess Edit Name, press the TOOLS button in Source List. Name thedevice connected to the input jacks to make your input source selectioneasier.✎ When connecting a PC to the HDMI IN 2(DVI) port with HDMI cable,you should set the TV to PC mode under Edit Name.✎ When connecting a PC to the HDMI IN 2(DVI) port with HDMIto DVI cable, you should set the TV to DVI PC mode under EditName.✎ When connecting an AV devices to the HDMI IN 2(DVI) port withHDMI to DVI cable, you should set the TV to DVI mode under EditName.InformationYou can see detailed information about the connected external device.y The slots and openings in the cabinet and in the back or bottom are provided for necessary ventilation. To ensure reliable operation of thisapparatus, and to protect it from overheating, these slots and openings must never be blocked or covered.- Do not cover the slots and openings with a cloth or other materials.- Do not block the slots and openings by placing this apparatus on a bed, sofa, rug or other similar surface.- Do not place this apparatus in a confined space, such as a bookcase or built-in cabinet, unless proper ventilation is provided.y Do not place this apparatus near or over a radiator or heat register, or where it is exposed to direct sunlight.y Do not place a vessel containing water (vases etc.) on this apparatus, as this can result in a risk of fire or electric shock.y Do not expose this apparatus to rain or place it near water (near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or neara swimming pool etc.). If this apparatus accidentally gets wet, unplug it and contact an authorized dealer immediately.y Make sure to pull out the power cord from the outlet before cleaning.y This apparatus use batteries. In your community, there might be regulations that require you to dispose of these batteries properly to protectthe environment. Please contact your local authorities for disposal or recycling information.y Do not overload wall outlets, extension cords, or adaptors beyond their capacity, since this can result in fire or electric shock.y Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them. Payparticular attention to cords at the plug end, where connected to adaptors, and at the point where they exit from the apparatus.y To protect this apparatus from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outletand disconnect the antenna or cable system. This will prevent damage to the set due to lightning and power line surges.y Before connecting the AC power cord to the DC adaptor outlet, make sure the voltage designation of the DC adaptor corresponds to the localelectrical supply. (depending on the model)y Never insert anything metallic into the open parts of this apparatus. Doing so may create a danger of electric shock.y To avoid electric shock, never touch the inside of this apparatus. Only a qualified technician should open this apparatus.y Make sure to plug the power cord in until it is firmly inserted. Pull on the plug, not the cord, when removing the power cord from the outlet. Donot touch the power cord with wet hands.y If this apparatus does not operate normally - in particular, if there are any unusual sounds or smells coming from it - unplug it immediately andcontact an authorized dealer or service center.y Be sure to pull the power plug out of the outlet if the TV is to remain unused or if you are to leave the house for an extended period of time(especially when children, elderly or disabled people will be left alone in the house).- Accumulated dust can cause an electric shock, an electric leakage, or a fire by causing the power cord to generate sparks and heat,or cause the insulation to deteriorate.y Be sure to contact an authorized service center, when installing your set in a location with heavy dust, high or low temperatures, high humidity,chemical substances or where it will operate for 24 hours a day such as in an airport, a train station, etc. Failure to do so may cause seriousdamage to your set.y Use only a properly grounded plug and receptacle.- An improper ground may cause electric shock or equipment damage. (Class l Equipment only.)y To turn off the apparatus completely, you must pull the power plug out of the wall socket. Consequently, the power plug should be readilyaccessible at all times.y Do not allow children to hang onto the product.y Store the accessories (batteries, etc.) in a location safely out of the reach of children.y Do not install the product in an unstable location such as a shaky self, a slanted floor, or a location exposed to vibration.y Do not drop or impart a shock to the product. If the product is damaged, disconnect the power cord and contact a service center.y To clean the product, unplug the power cord from the power outlet and wipe the product using a soft cloth dipped in a small amount of water.Do not use any chemicals such as wax, benzene, alcohol, thinners, insecticide, air freshener, lubricant or detergent. This may damage theappearance or erase the printing on the product.y Do not expose the apparatus to dripping or splashing.y Do not dispose of batteries in a fire.y Do not short circuit, disassemble, or overheat the batteries.y There is a danger of explosion if you replace the batteries with the wrong type of battery. Replace only with the same or equivalent type.y WARNING - TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OTHER OPEN FLAMES AWAY FROM THIS PRODUCT AT ALLTIMES.Warning! Important Safety InstructionsPlease read the safety instructions below before installing and using the product.CAUTIONCAUTION: TO REDUCE THE RISK OF ELECTRICSHOCK, DO NOT REMOVE COVER (OR BACK). THEREARE NO USER SERVICEABLE PARTS INSIDE. REFERALL SERVICING TO QUALIFIED PERSONNEL.RISK OF ELECTRIC SHOCK. DO NOT OPEN.This symbol indicates that high voltage ispresent inside. It is dangerous to make any kindof contact with any internal part of this product.This symbol indicates that important literatureconcerning operation and maintenance hasbeen included with this product. HDMI OUTAUDIO OUTR-AUDIO-LVIDEO OUTOPTICALWRR WWRWRR WAUDIO OUTR-AUDIO-LCOMPONENT OUTPR P B YYRYR BR B RGRGAUDIO INR-AUDIO-LDVI OUTANT OUTorPower InputTV Rear PanelTV Side PanelVHF/UHF AntennaCableUSBComponent connectionHDMI connection PC connection(Using an HDMI (to DVI) Cable)Audio connection (Digital)AV connectionAudio connection (Analog)Blu-ray player / DVD / Set-top box Digital Audio SystemDVD / Home Theater Blu-ray player / DVD VCR / Blu-ray playery The rear panel may differdepending on the model.Figures and illustrations in this User Manual are provided for reference only andmay differ from actual product appearance. Product design and specificationsmay be changed without notice.Still image warningAvoid displaying still images (such as jpeg picture files) or still image elements (suchas TV channel logos, panorama or 4:3 image format, stock or news bars at screenbottom etc.) on the screen. Constant displaying of still pictures can cause ghosting ofLED screen, which will affect image quality. To reduce risk of this effect, please followbelow recommendations:y Avoid displaying the same TV channel for long periods.y Always try to display any image on full screen, use TV set picture format menu forbest possible match.y Reduce brightness and contrast values to minimum required to achieve desiredpicture quality, exceeded values may speed up the burnout process.y Frequently use all TV features designed to reduce image retention and screenburnout, refer to proper user manual section for details.Securing the Installation SpaceKeep the required distances between the product and other objects (e.g. walls) toensure proper ventilation.Failing to do so may result in fire or a problem with the product due to an increase inthe internal temperature of the product.✎ When using a stand or wall-mount, use parts provided by Samsung Electronicsonly.• If you use parts provided by another manufacturer, it may result in a problemwith the product or an injury due to the product falling.✎ The appearance may differ depending on the product.✎ Be careful when you contact the TV because some parts can be somewhat hot.Installation with a stand. Installation with a wall-mount.4inches4inches4inches4inches4inches4inches4inchesContact SAMSUNG WORLDWIDEIf you have any questions or comments relating to Samsung products,please contact the SAMSUNG customer care center.Country Customer Care Center  Web SiteMEXICO 01-800-SAMSUNG(726-7864) www.samsung.comARGENTINA 0800-333-3733 www.samsung.comBRAZIL 0800-124-4214004-0000 www.samsung.comBolivia 800-10-7260 www.samsung.comCHILE 800-SAMSUNG(726-7864)From mobile 02-482 82 00 www.samsung.comCOLOMBIA 01-8000112112 www.samsung.comCOSTA RICA 0-800-507-7267www.samsung.com/latin (Spanish)www.samsung.com/latin_en (English)DOMINICA 1-800-751-2676ECUADOR 1-800-10-7267EL SALVADOR 800-6225GUATEMALA 1-800-299-0013HONDURAS 800-27919267JAMAICA 1-800-234-7267 www.samsung.comNICARAGUA 00-1800-5077267 www.samsung.com/latin (Spanish)www.samsung.com/latin_en (English)PANAMA 800-7267PERU 0-800-777-08 www.samsung.comPUERTO RICO 1-800-682-3180 www.samsung.comTRINIDAD &TOBAGO 1-800-SAMSUNG(726-7864) www.samsung.comVENEZUELA 0-800-100-5303 www.samsung.com(MEXICO Only)IMPORTADO POR: SAMSUNG ELECTRONICS MÉXICO S.A. de C.V.AV. PRESIDENTE MASARIK #111 INT701COL. CHAPULTEPEC MORALES C.P.11570DELEGACION MIGUEL HIDALGO MEXICO. DISTRITO FEDERALTel: 01-55-5747-5100 / 01-800-726-7864BN68-04801CBN68-04801C-00y Remote Control & Batteries (AAA x 2)y Warranty Card / Regulatory Guidey Owner’s Instructionsy Stand Wire Holdery Power Cordy Holder Ring (2EA) (for 46", 50" models)Display Modes (HDMI/DVI Input)Optimal resolution4 series:1366 x 768@60Hz / 5 series: 1920 x 1080@60HzMode ResolutionHorizontalFrequency(KHz)VerticalFrequency(Hz)Pixel ClockFrequency(MHz)SyncPolarity(H / V)1366 x 768 1920 x 1080IBM 720 x 400 31,469 70,087 28,322 -/+ c cMAC640 x 480 35,000 66,667 30,240 -/- c c832 x 624 49,726 74,551 57,284 -/- c c1152 x 870 68,681 75,062 100,000 -/- cVESA DMT640 x 480 31,469 59,940 25,175 -/- c c640 x 480 37,861 72,809 31,500 -/- c c640 x 480 37,500 75,000 31,500 -/- c c800 x 600 37,879 60,317 40,000 +/+ c c800 x 600 48,077 72,188 50,000 +/+ c c800 x 600 46,875 75,000 49,500 +/+ c c1024 x 768 48,363 60,004 65,000 -/- c c1024 x 768 56,476 70,069 75,000 -/- c c1024 x 768 60,023 75,029 78,750 +/+ c c1152 x 864 67,500 75,000 108,000 +/+ c1280 x 720 45,000 60,000 74,250 +/+ c c1280 x 800 49,702 59,810 83,500 -/+ c1280 x 1024 63,981 60,020 108,000 +/+ c1280 x 1024 79,976 75,025 135,000 +/+ c1366 x 768 47,712 59,790 85,500 +/+ c c1440 x 900 55,935 59,887 106,500 -/+ c1600 x 900RB 60,000 60,000 108,000 +/+ c1680 x 1050 65,290 59,954 146,250 -/+ c1920 x 1080 67,500 60,000 148,500 +/+ cInstalling batteries (Battery size: AAA)✎ NOTE• Use the remote control within 23 feet from TV.• Bright light may affect the performance of the remote control.Avoid use when nearby fluorescent lights or neon signs.• The Color and shape may vary depending on the model.Press to select additional channels (digital) beingbroadcasted by the same station. For example, toselect channel ‘54-3’, press ‘54’, then press ‘-’ and ‘3’.Returns to the previous channel.Press to directly access to channels.Turns the TV on and off.Use these buttons in a specific feature.P.SIZE: Lets you choose the picture size.CC: Controls the caption decoder.: Turns the Sports Mode on or off.Cuts off the sound temporarily.Automatically shuts off the TV at a preset time.Displays the channel list on the screen.Displays information on the TV screen.Quickly select frequently used functions.Selects the on-screen menu items and changes thevalues seen on the menu.Exit the menu.Returns to the previous menu.Displays and selects the available videosources.Use these buttons according to the directionon screen.Changes channels.Displays the main on-screen menu.Views the Media Play.Adjusts the volume.MEDIA.P SLEEPFÚTBOL- 2 -- 1 -- 6 -- 5 -- 3 -- 7 -- 4 -- 8 -- 2 -- 1 -- 6 -- 5 -- 3 -- 7 -- 4 -- 8 -UF4000_5000_32_ZX_ENG-US.indd 1 2013-01-30 3:46:37

/ 2

Related manuals for Samsung 5000 Series