Samsung 440 User Manual

Also see for PN51D440: User manual User manual Specifications User manual User manual

Ill HDMIBlackLevel(Normal/ Low): Lets you select theblack level on the screen to adjust the screen depth.Available only in HDMI mode.Ill Film Mode (Off / Auto): Sets the TV so that it sensesautomatically and then process film signals from allsources and adjusts the picture for optimum quality.Available in TV, AV, COMPONENT (480i/1080i)and HDMI (480i/1080i),Ill Screen Burn Protection: To reduce the possibility ofscreen burn, this unit is equipped with screen burnprevention technology. The Time setting allows you toprogram the time between movement of the picture inminutes,Pixel Shift (Off / On): Using this function, you canminutely move pixels on the PDP in horizontal or verticaldirection to minimize after images on the screen.Optimum condition for pixel shiftHorizontal 0~4 4Vertical 0~4 4Time(minute) 1~4 min 4 rainThe Pixel Shift value may differ depending on theTV size (inches) and mode.This function is not available in the Screen Fitmode.Scrolling: This function removes after-images on thescreen by moving all the pixels on the PDP accordingto a pattern. Use this function when there are remainingafter-images or symbols on the screen, especially whenyou displayed a still image on the screen for a long time.The after-image removal function has to beexecuted for a long time (approximately 1 hour)to effectively remove after-images on the screen.If the after-image is not removed after performingthe function, repeat the function again.Press any key on the remote control to cancel thisfeature.Side Gray (Dark / Light): When you watch TV with thescreen ratio set to 4:3, the screen is prevented from anydamage by adjusting the white balance on both extremeleft and right sides.Picture Reset (Reset Picture Mode /Cancel) .............................................................................................Resets your current picture mode to its default settings.Changing the Preset Sound Mode(_ MENUiTrl _ Sound --_ Mode --_ ENTERE_Select an option using the up and down arrow keys, and thepress ENTER.ModeUse the up and down arrow keys to select an option, andthen press ENTER,Standard: Selects the normal sound mode.mmmmmMusic: Emphasizes music over voices.Movie: Provides the best sound for movies.Clear Voice: Emphasizes voices over other sounds.Custom: Increase the intensity of high-frequency soundto allow a better listening experience for the hearingimpaired.Adjusting Sound Settings(_ MENU iTrl _ Sound --_ Equalizer --_ ENTERI_%_The Equalizer displays a series of sliders. Use the up anddown arrow keys to select a slider. Use the left and rightarrow keys to change the slider's value. To Reset theEqualizer, select Reset and press ENTER, then pressENTER again. To exit, select CLOSE, and then pressENTER,Equalizer .........................................................................................Adjusts the sound output.Ill Balance L/R: Adjusts the balance between the right andleft speaker.Ill 100Hz / 300Hz / lkHz / 3kHz / 10kHz (BandwidthAdjustment): Adjusts the volume level of specificbandwidth frequencies.Ill Reset: Resets the equalizer to its default settings.Sound Settings(_ MENUrlTI _ Sound --_ ENTERI_%_SRS TruSurround HD (Off / On)This function provides a virtual 5.1 channel surround soundexperience through a pair of speakers using HRTF (HeadRelated Transfer Function) technology.English 17