Samsung 450 Series Installation Manual

Also see for Series 4+: User manual User manual User manual User manual User manual

Contents

28English¦ Menu ItemsTo Enter this menu: Press the MUTE → 1 → 1 → 9 → ENTERE buttons in order.To exit from this menu : Power Off (or Power Off and unplug if you have changed SI Vendor), and then turn on again. Anychanges you made are saved.HD460 / HD47x / HD67xMenu Item initial Value DescriptionHospitalityMode Hospitality ModeStandalone(Interactivefor 478/678models)Select the Hospitality mode.• Standalone mode: TV works alone, without an SI STB or SBB• Interactive mode: TV works with an SI STB or SBBSI Vendor SI VendorOFF(Samsungfor 478/678models)• Interactive mode : Samsung / OCC / MTI / Nstreams / Enseo / Cardinal /Guestek / Seachange / EBL / MDC / Innvue• Stand-alone mode : OFF / Smoovie / SSCPPower OnPower On Channel Last SavedSet the default values that will be applied when the TV is turned on.• User Defined : Lets you set Power On Channel and Channel Type manually. SeePower On Channel and Channel Type below.• Last Saved : If you select this item, when the TV is turned on, it displays thechannel it was displaying when it was turned off.Power On ChannelNum … When the TV is turned on, it switches automatically to this channel.Power On ChannelType … • Select channel band : AIR (analog air band), DTV (digital air band), CATV (analogcable band), CDTV (digital cable band)Power On Volume Last Saved• User Defined : Lets you set the Power On Volume manually. See Power OnVolume below.• Last Saved : When the TV is turned on, it returns to the volume that had beenset when the power had been turned off.Power On VolumeNum … The TV turns on with this Volume Level in Stand Alone Hospitality mode.Min Volume 0 The minimum Volume Level the user can set in Stand Alone Hospitality mode.Max Volume 100 The maximum Volume Level the user in Stand Alone Hospitality mode.Power On Source TV Select the input source the TV displays when turns on.Power On Option Last OptionDetermines the TV's state when power returns after a power failure or after you haveunplugged the TV and then plugged it in again.• Last Option : Returns to its last Power state. If it was in Stand-by, it returns toStand-by. If it was on, it turns on.• Power On : When the power returns, the TV turns on.• Standby : When the power returns, the TV enters the Standby mode.ChannelChannel Setup Gives you direct, immediate access to some of the Channel menu functions on theuser Channel menu such as Auto Program, Antenna selection, etc.Channel EditorThe Channel Editor lets you edit the channels stored in the TV's memory. UsingChannel Editor you can:• Change the channel numbers and names, and sort the channels in your desiredchannel number order.• Apply the video mute to channels you select. The video mute blanks out thevideo from a channel and outputs only the sound while displaying a speaker iconon the screen.The Channel Editor also lets you view information about each channel easily, withoutyour having to display each channel directly.Channel Bank Editor The Channel Bank Editor in conjunction with the SMOOVIE remote lets you controlthe channels guests have access to the channels a guest can access depend onthe Bank Card installed in their SMOOVIE remote.Mixed Channel Map OFF• ON : Display the cable program channels with air program channels on the chan-nel list at the same time.• OFF : Display the cable program channels or air program channels on the chan-nel list one time. (can`t display them both at the same time)Dynamic SI ON• ON : Check the DTV Program channel number. (If Dynamic SI is On, it is notavailale to edit DTV channels in Channel Editor.)• OFF : Does not check the DTV Program channel number. (If Dynamic SI is Off,it is available to edit DTV channels in Channel Editor, but additional DTV channelprogram number update is not supported.)