Samsung 460CXn - SyncMaster - 46" LCD TV User Manual

Contents

Samsung 460CXn - SyncMaster - 46" LCD TV User Manual Manual pdf 34 page image

1. Locate the A/V output jacks on the camcorder. They are usually found on the side or back of thecamcorder. Connect a set of audio cables between the AUDIO OUTPUT jacks on the camcorderand the AV AUDIO IN [L-AUDIO-R] on the LCD Display.2. Connect a video cable between the VIDEO OUTPUT jack on the camcorder and the AV IN[VIDEO] on the LCD Display.3. Select AV for the Camcorder connection using the Source button on the front of the LCD Displayor on the remote control.4. Then, start the Camcorders with a tape inserted.NoteThe audio-video cables shown here are usually included with a Camcorder. (If not, check your localelectronics store.) If your camcorder is stereo, you need to connect a set of two cables.Connecting Using a HDMI CableNote• Input devices such as digital DVD are connected to the HDMI terminal of the LCD Display usingthe HDMI cable.• You cannot connect a PC to the HDMI terminal.Connecting Using a DVI to HDMI CableNote• Connect the DVI output terminal of a digital output device to the HDMI terminal of the LCDDisplay using a DVI to HDMI cable.• Connect the red and white jacks of an RCA to stereo (for PC) cable to the same colored audiooutput terminals of the digital output device, and connect the opposite jack to the DVI / PC / HDMIAUDIO IN terminal of the LCD Display.Connections