Samsung 5 SERIES User Manual

Also see for 5 Series: Quick setup guide Quick setup guide Quick setup guide Quick start guide User manual

Contents

English - 1705 Performing the initial setup- The initial setup differs from model to model.- Turn on the TV using the P button on the remote control or TV controller.Initial setupThe initial setup dialogue box appears when the TV is first activated. Follow the on-screeninstructions to finish the initial setup process such as selecting the menu language, scanningchannels, connecting to the network, and more. During each step, either make a choice or skip thestep. You can manually perform this process at a later time in the MENUm → System → Setup →ENTERE menu.- If you connect any external device to HDMI IN (STB) before starting initial setup, the source ofyour live TV signal is set to STB. After finishing with this process, you will not be able to scan allchannels and stores them in the TV’s memory.- If you want to connect aerial cable to your TV, select Aerial. In this case, you will be able to scanall channels and stores them in the TV’s memory.If You Want to Reset This Feature...Select System - Setup (Initial Setup). Enter your 4 digit PIN number. The default PIN number is “0-0-0-0”.If you want to change the PIN number, use the Change PIN function.You should do Setup (MENU → System) again at home even though you did in shop already.If you forget the PIN code, press the remote control buttons in the following sequence in Standbymode, which resets the PIN to “0-0-0-0”: MUTE → 8 → 2 → 4 → POWER (on)UK5100B_XU_BN68-07408A-02_ENG.indb 17 2016-07-11 오전 11:43:49Downloaded from www.vandenborre.be