English - 4Viewing Common InterfaceThis contains information on CAM inserted in the CI slot and displays it.1. Press the MENU button to display the menu.Press the ▲ or ▼ button to select “Setup”, then press the ENTER button.2. Press the ▲ or ▼ button to select “Common Interface”, then press theENTER button.3. Press the ▲ or ▼ button to select “Application Info.”Press the ENTER button to display the information for your application.4. Press the EXIT button to exit.The Application Info inserting is about the CI CARD. You can install the CAManytime whether the TV is ON or OFF.1. Purchase the CI CAM module by visiting your nearest dealer or by phone.2. Insert the CI CARD into the CAM in the direction of the arrow until it fits.3. Insert the CAM with the CI CARD installed into the common interface slot.(Insert the CAM in the direction of the arrow, right up to the end so that it isparallel with the slot.)4. Check if you can see a picture on a scrambled signal channel.Selecting the CI (Common Interface) MenuThis enables the user to select from the CAM-provided menu.1. Press the MENU button to display the menu.Press the ▲ or ▼ button to select “Setup”, then press the ENTER button.2. Press the ▲ or ▼ button to select “Common Interface”, then press theENTER button.3. Press the ▲ or ▼ button to select “CI Menu”, then press the ENTERbutton.4. Press the ▲ or ▼ button to select the required option, then press theENTER button.5. Press the EXIT button to exit.Select the CI Menu based on the menu PC Card.➣➣SetupPIPSoftware UpgradeCommon Interface ►Common InterfaceCI Menu ►Application Info.U Move E Enter e ExitCI MenuMain menuModule informationSmart card informationLanguageSoftware DownloadPress Ok to select, or Exit to quit.U Move E Enter e ExitSetupPIPSoftware UpgradeCommon Interface ►Common InterfaceCI Menu ►Application Info.U Move E Enter e Exit
