Samsung 5 Series User Manual

Also see for 5 Series: Quick setup guide Quick setup guide Quick setup guide Quick start guide User manual

English - 38Listening through a Receiver (Home theater)You can listen to sound through a receiver instead of the TV speaker.1. Press the TOOLS button. Press the ENTERE button to select Anynet+ (HDMI-CEC).2. Press the ▲ or ▼ button to select Receiver. Press the ◄ or ► button to select On or Off.If your receiver supports audio only, it may not appear in the device list.NThe receiver will work when you have properly connected the Optical IN jack of theNreceiver to the Optical Out jack of the TV.When the receiver (home theater) is set to On, you can hear sound output from theNTV’s Optical jack. When the TV is displaying a DTV(air) signal, the TV will send out 5.1channel sound to the Home theater receiver. When the source is a digital componentsuch as a DVD and is connected to the TV via HDMI, only 2 channel sound will be heard from the Home Theater receiver.When using the Media Play feature, sound may not output properly through the receiver.NWhen listening through the receiver, there are restrictions for using the audio-related (MTS, Preferred language) menus.NIf there is a power interruption to the TV when theN Receiver is set to On (by disconnecting the power cord or a power failure), theSpeaker Select may be set to External Speaker when you turn the TV on again. (see page 22)Troubleshooting for Anynet+Symptom SolutionAnynet+ does not work. Check if the device is an• Anynet + device. The Anynet + system supports Anynet + devices only.Connect only one receiver (home theater).•Check if the• Anynet+ device power cord is properly connected.Check the• Anynet + device’s Video/Audio/HDMI 1.3 cable connections.Check whether• Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu.Check whether the TV remote control is in TV mode.•Check whether it is• Anynet + exclusive remote control.Anynet+ doesn’t work in certain situations. (Searching channels, Plug & Play, etc.)•When connecting or removing the HDMI 1.3 cable, please make sure to search devices again•or turn your TV off and on again.Check if the• Anynet + Function of Anynet+ device is set on.I want to start Anynet+. Check if the Anynet• + device is properly connected to the TV and check if the Anynet +(HDMI-CEC) is set to On in the Anynet + Setup menu.Press the• TV button on the TV remote control to switch to TV. Then press the TOOLS buttonto show the Anynet + menu and select a menu you want.I want to exit Anynet+. Select View TV in the• Anynet + menu.Press the• SOURCE button on the TV remote control and select a device other than Anynet +devices.(Note that the channel button operates only when a tuner-embedded Anynet+ device is not•connected.)The message Connecting toAnynet+ device...appears on the screen.You cannot use the remote control when you are configuring Anynet+ or switching to a view•mode.Use the remote control when the Anynet+ setting or switching to view mode is complete.•The Anynet+ device does notplay.You cannot use the play function when• Plug & Play is in progress.The connected device is notdisplayed.Check whether or not the device supports• Anynet + functions.Check whether or not the HDMI 1.3 cable is properly connected.•Check whether• Anynet+ (HDMI-CEC) is set to On in the Anynet + setup menu.Search• Anynet + devices again.You can connect an• Anynet + device using the HDMI 1.3 cable only. Some HDMI cables maynot support Anynet+ functions.If it is terminated by an abnormal situation such as disconnecting the HDMI cable or power•cord or a power failure, please repeat the device scan.The TV programme cannot berecorded.Check whether the antenna jack on the recording device is properly connected.•The TV sound is not outputthrough the receiver.Connect the optical cable between TV and the receiver.•View TVDevice ListRecord : DVDRDVDR MENUDVDR INFOReceiver ◄ On ►SetupU Move L Adjust R Return