English - 5Using the Option Menu1 Complete Steps 1 to 3 of Using the WISELINK Menu.(Refer to page 32) Press the ◄ or ► button to move to Photo, then press theENTER button.The saved file information is displayed as a folder or file. Press the ▲, ▼, ◄ and ► button to select a file, thenpress the ENTER button. Pressing the button over a photothumbnail displays the photo in full screen.4 Press the INFO button to display the option (Start SlideShow, Zoom, Rotate, List)Zoom: Press the ▲ or ▼ button to select Zoom, then press theENTER button. Each time the ▲ or ▼ button is pressed, the photo sizeincreases.(X1 → X → X4 )- X1 : Restore a photo to its original size.- X : Zoom-in to a photo x2.- X4 : Zoom-in to a photo x4. To pan up/down/left/right in the zoomed-in photo, press theINFO button to remove option menu, then press the ▲, ▼, ◄and ► buttons.➢ The Rotate, Start Slide Show option is disabled when the Zoom option is selected.Rotate: Press the ▲ or ▼ button to select Rotate, then press theENTER button. Each time the ▲ or ▼ button is pressed, the photo rotatesrepeatedly.- 0º : This rotates a photo to its original position- 0º : This rotates a photo by 90 degrees- 10º : This rotates a photo by 180 degrees- 0º : This rotates a photo by 270 degrees➢ The rotated file is not saved.➢ The Zoom, Start Slide Show option is disabled when the Rotate option is selected.ExitStart Slide ShowZoom X1 Rotate 0º ListExitStart Slide ShowZoom X1Rotate 0º ListX1X2X4ExitStart Slide ShowZoom X1 Rotate 0ºList0º90º180º270ºBN68-01434A-Eng.indb 35 2008-03-10 오후 3:31:07