Samsung 5 Series User Manual

Also see for 5 Series: Quick setup guide Quick setup guide Quick setup guide Quick start guide User manual

English - 39Setting Up Anynet+Anynet❑ +(HDMI-CEC) SetupPress theT TOOLS button to display Tools menu.You can also display Anynet+ menu by selecting Tools → Anynet+(HDMI-CEC).Anynet +(HDMI-CEC) → Off / OnTo use the Anynet + Function, Anynet + (HDMI-CEC) must be set to On.When theN Anynet + (HDMI-CEC) function is disabled, all the Anynet+ relatedoperations are deactivated.Auto Turn Off → No / YesSetting an Anynet + Device to turn Off Automatically when the TV is Turned OffThe active source on the TV remote must be set to TV to use the Anynet+ function.NIf you setN Auto Turn Off to Yes, connected external devices are also turned off whenthe TV is turned off. If an external device is still recording, it may or may not turn off.Switching between Anynet+ Devices1. Press the TOOLS button. Press the ENTERE button to select Anynet + (HDMI-CEC).2. Press the ▲ or ▼ button to select Device List, then press the ENTERE button.Anynet+ devices connected to the TV are listed. If you cannot find a device youNwant, press the red button to scan for devices.Only when you setN Anynet+ (HDMI-CEC) to On in the Setup menu, the Device Listmenu appears.3. Press the ▲ or ▼ button to select to a particular device and press the ENTEREbutton. It is switched to the selected device.Switching to the selected devices may take up to 2 minutes. You cannot cancel theNoperation during the switching operation.The time required to scan for devices is determined by the number of connected devices.NIf you have selected external input mode by pressing theN SOURCE button, you cannot use the Anynet+ function. Make sure toswitch to an Anynet+ device by using the Device List.Anynet❑ + MenuThe Anynet + menu changes depending on the type and status of the Anynet + devices connected to the TV.Anynet + Menu DescriptionView TV Anynet+ mode changes to TV broadcast mode.Device List Shows the Anynet+ device list.(device_name) MENU Shows the connected device menus. E.g. If a DVD recorder is connected, the disc menu of theDVD recorder will appear.(device_name) INFO Shows the play menu of the connected device. E.g. If a DVD recorder is connected, the play menuof the DVD recorder will appear.Record: (*recorder) Starts recording immediately using the recorder. (This is only available for devices that support therecording function.)(*recorder) Reserve Recording Enables reserving a recording for the recorder. (This is only available for devices that support therecording reservation function.)Stop Recording: (*recorder) Stops recording.Receiver Sound is played through the receiver.Continued...ApplicationMedia Play (USB)Anynet + (HDMI-CEC)►Anynet+ (HDMI-CEC) : ONAuto Turn Off : YesU Move E Enter R ReturnSetupNoYesView TVDevice ListRecord : DVDRDVDR MENUDVDR INFOReceiver : OnSetupU Move L Adjust R Return