Samsung 5 series User Manual
Also see for 5 Series: Quick setup guideQuick setup guideQuick setup guideQuick start guideUser manual
                                                                                                                                                                                                                                                      | |
Contents
|
12 EnglishBasic FeaturesChannel Menu¦ Retuning channelsAntenna (Air / Cable / Satellite)Before your television can begin memorizing the availablechannels, you must specify the type of signal source that isconnected to the TV (i.e. an Air or Satellite system).CountryThe PIN input screen appears. Enter your 4 digit PIN number.Digital Channel■ : Change the country for digital channels.Analogue Channel■ : Change the country for analoguechannels.Auto StoreScans for a channel automatically and stores in the TV.Automatically allocated programme numbers may not✎ correspond to actual or desired programme numbers. If achannel is locked using the Child Lock function, the PINinput window appears.When Antenna Source is set to Air or Cable:Antenna Source (Air / Cable)■ : Select the antenna sourceto memorise.Channel Source (Digital & Analogue / Digital / Analogue)■ :Select the channel source to memorise.When selecting Cable → Digital & Analogue or Digital:Provide a value to scan for cable channels.Search Mode (Full / Network / Quick): Scans for allchannels with active broadcast stations and stores them inthe TV.If you set✎ Quick, you can set up Network, NetworkID, Frequency, Modulation, Symbol Rate manuallyby press the button on the remote control.Network (Auto / Manual): Selects the Network ID settingmode among Auto or Manual.Network ID: When Network is Manual, you can set upNetwork ID using the numeric buttons.Frequency: Displays the frequency for the channel. (differsin each country)Modulation: Displays available modulation values.Symbol Rate: Displays available symbol rates.When Antenna Source is set to Satellite:Channel Type (All / TV / Radio):■ Select the Channel typeto memorise.Satellite (All / Astra 19.2E)■ : Selects the satellite to scan.Scan Mode (All Channels / Free Channels Only)■ : Selectsthe scanning mode of the selected satellite.Manual StoreScans for a channel manually and stores in the TV.If a channel is locked using the✎ Child Lock function, thePIN input window appears.When Antenna Source is set to Air or Cable:Digital Channel■ : When scanning has finished, channelsare updated in the channel list.When selecting✎ Antenna → Air: Channel, Frequency,BandwidthWhen selecting✎ Antenna → Cable: Frequency,Modulation, Symbol RateAnalogue Channel (Programme, Colour System, Sound■System, Channel, Search, Store): If there is abnormalsound or no sound, reselect the sound standard required.Channel mode✎ Px (programme mode): When tuning is complete, thebroadcasting stations in your area have been assignedto position numbers from P0 to P99. You can select achannel by entering the position number in this mode.Cx (aerial channel mode) / S (cable channel mode): Thesetwo modes allow you to select a channel by entering theassigned number for each aerial broadcasting station orcable channel.When Antenna Source is set to Satellite:Satellite:■ Selects the satellite using the up/down buttons.Transponder■ : Selects the transponder using the up/ downbuttons.Scan Mode (All Channels / Free Channels Only)■ : Selectseither free or all channels to store.Network Search (Disable / Enable)■ : Enable / Disablenetwork search using the up/down buttons.Signal Quality:■ Display the current status of broadcastingsignal.Information on a satellite and its transponder is subject to✎ change depending on the broadcasting conditions.When setting is completed, move to✎ Search and press theENTERE button. Channel scan is started. |
Related manuals for Samsung 5 Series
manualsdatabase
Your AI-powered manual search engine