English - 16Picture optionsIn PC mode, you can only make changes to the Colour Tone and Size from among theitems in Picture options.Colour Tone → Cool / Normal / Warm1 / Warm2 / Warm3Warm1, Warm2 or Warm3 is only activated when the picture mode is Movie.Settings can be adjusted and stored for each external device you have connected to aninput of the TV.SizeOccasionally, you may want to change the size of the image on your screen. Your TV comeswith several screen size options, each designed to work best with specific types of video input. Your cable box/satellite receivermay have its own set of screen sizes as well. In general, though, you should view the TV in 16:9 mode as much as possible.You can select these options by simply pressing the P.SIZE button on the remote control.Auto Wide: Automatically adjusts the picture size to the 16:9 aspect ratio.16:9: Adjusts the picture size to 16:9 appropriate for DVDs or wide broadcasting.Wide Zoom: Magnify the size of the picture more than 4:3.Zoom: Magnifies the 16:9 wide picture (in the vertical direction) to fit the screen size.4:3: This is the default setting for a video movie or normal broadcasting.Screen Fit: Use the function to see the full image without any cut-off when HDMI (720p / 1080i / 1080p) or Component (1080i/ 1080p) signals are input.Depending on the input source, the picture size options may vary.The items available may differ depending on the selected mode.In PC Mode, only 16:9 and 4:3 mode can be adjusted.Settings can be adjusted and stored for each external device you have connected to an input of the TV.Temporary image retention may occur when viewing a static image on the set for more than two hours.Wide Zoom: Press the ► button to Select Position, then press the ENTErE button. Press the ▲ or ▼ button to move thepicture up / down. Then press the ENTErE button.Zoom: Press the ► button to Select Position, then press the ENTErE button. Press the ▲ or ▼ button to move the pictureup and down. Then press the ENTErE button. Press the ► button to Select Size, then press the ENTErE button. Pressthe ▲ or ▼ button to magnify or reduce the picture size in the vertical direction. Then press the ENTErE button.After selecting Screen Fit in HDMI (1080i / 1080p) or Component (1080i / 1080p) mode: Select Position by pressing the ◄or ► button. Use the ▲, ▼, ◄ or ► button to move the picture.reset: Press the ◄ or ► button to select reset, then press the ENTErE button. You can initialize the setting.If you use the Screen Fit function with HDMI 720p input, 1 line will be cut at the top, bottom, left and right as in the Overscanfunction.Screen Mode → 16:9 / Wide Zoom / Zoom / 4:3When setting the picture size to Auto Wide in a 16:9 wide TV, you can determine the picture size you want to see the 4:3 WSS(Wide Screen Service) image or nothing. Each individual European country requires different picture size so this function isintended for users to select it.16:9: Sets the picture to 16:9 wide mode.Wide Zoom: Magnify the size of the picture more than 4:3.Zoom: Magnify the size of the picture vertically on screen.4:3: Sets the picture to 4:3 normal mode.This function is available in Auto Wide mode.This function is not available in PC, Component or HDMI mode.Digital NR → Off / Low / Medium / High / AutoIf the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any staticand ghosting that may appear on the screen.When the signal is weak, select one of the other options until the best picture is displayed.HDMI Black Level → Normal / LowYou can select the black level on the screen to adjust the screen depth.This function is active only when an external device is connected to the TV via HDMI (RGB signals).❑N■NN■O●●●●●●NNNNNNNNN■●●●●NN■N■NColour Tone : Normal ▶Size : Auto WideScreen Mode : 16:9Digital NR : AutoHDMI Black Level : NormalFilm Mode : OffBlue Only Mode : OffU Move E Enter R ReturnPicture Options
