15English03 Basic FeaturesSize■ : Your cable box/satellite receivermay have its own set of screensizes as well. However, we highlyrecommend you use 16:9 mode mostof the time.Auto Wide: Automatically adjusts thepicture size to the 16:9 aspect ratio.16:9 : Adjusts the picture size to 16:9 for DVDs or widebroadcasting.Wide Zoom: Magnifies the picture size more than 4:3.Adjusts the Position by using✎ ▲, ▼ buttons.Zoom: Magnifies the 16:9 wide pictures vertically to fitthe screen size.Adjusts the Position or Size by using✎ ▲, ▼ button.4:3 : The default setting for a movie or normalbroadcasting.Do not watch in 4:3 format for a long time. Traces✎ of borders displayed on the left, right and centreof the screen may cause image retention(screenburn) which are not covered by the warranty.Screen Fit: Displays the full image without any cut-offwhen HDMI (720p / 1080i / 1080p) or Component(1080i / 1080p) signals are input.NOTE✎ After selectingx Screen Fit in HDMI (1080i/1080p) orComponent (1080i/1080p) mode, you may need tocenter the picture:1. Press the ◄ or ► button to select Position.2. Press the ENTERE button.3. Press the ▲, ▼, ◄ or ► button to move thepicture.Depending on the input source, the picture sizex options may vary.The available items may differ depending on thex selected mode.In PC mode, onlyx 16:9 and 4:3 modes can beadjusted.Settings can be adjusted and stored for eachx external device connected to an input of the TV.If you use thex Screen Fit function with HDMI 720pinput, 1 line will be cut at the top, bottom, left andright as in the overscan function.■ Screen Mode (16:9 / Wide Zoom / Zoom / 4:3):Available only when picture size is set to Auto Wide.You can determine the desired picture size at the 4:3WSS (Wide Screen Service) size or the original size.Each European country requires different picture size.Not available in PC, Component or HDMI mode.✎Digital Noise Filter (Off / Low / Medium / High / Auto■/ Auto Visualisation): When the broadcast signal isweak, some static and ghosting may appear. Select oneof the options until the best picture is displayed.Auto Visualisation: When changing analogue channels,displays signal strength.Only available for analogue channels.✎ When bar is green, you are receiving the best✎ possible signal.MPEG Noise Filter (Off / Low / Medium / High /■Auto): Reduces MPEG noise to provide an improvedpicture quality.Disabled under PC mode.✎HDMI Black Level (Normal / Low)■ : Selects the blacklevel on the screen to adjust the screen depth.Available only in HDMI mode (RGB signals).✎Film Mode (Off / Auto1 / Auto2)■ : Sets the TV toautomatically sense and process film signals from allsources and adjust the picture for optimum quality.Available in TV, AV, COMPONENT (480i / 1080i)✎ and HDMI (480i / 1080i).Auto Protection Time (2 hours / 4 hours / 8 hours■/ 10 hours / Off) : If the same image remains on thescreen, Auto Screen Burn Protector will work.Picture Reset (OK / Cancel)Resets your current picture mode to its default settings.Setting up the TV with Your PC¦Set the input source to PC.Auto Adjustment tAdjust frequency values/positions and fine tune the settingsautomatically.Not available when connecting through HDMI/DVI✎ cable.ScreenCoarse / Fine■ : Removes or reduces picture noise. If thenoise is not removed by Fine-tuning alone, then adjustthe frequency as best as possible (Coarse) and Fine-tune again. After the noise has been reduced, readjustthe picture so that it is aligned to the centre of screen.Position■ : Adjust the PC screen position with directionbutton (▲ / ▼ / ◄ / ►).Image Reset■ : Resets the image to default settings.[LC550-XH]BN68-02688P.indb 15 2010-10-27 �� 12:32:43