English - 0ANYNET+Connecting Anynet+ DevicesWhat is Anynet+?Anynet+ is a function that enables you to control all connected Samsung devices that support Anynet+ with your Samsung TV’sremote. The Anynet+ system can be used only with Samsung devices that have the Anynet+ feature. To be sure your Samsungdevice has this feature, check if there is an Anynet+ logo on it.To connect to a TV. Connect the HDMI IN (, , (DVI) or 4) jack on the TV and the HDMI OUT jack of the corresponding Anynet+ device using anHDMI cable.To connect to Home Theatre. Connect the HDMI IN (, , (DVI) or 4) jack on the TV and the HDMI OUT jack of the corresponding Anynet+ device using anHDMI cable.. Connect the HDMI IN jack of the home theatre and the HDMI OUT jack of the corresponding Anynet+ device using an HDMIcable.Connect the Optical cable between the DIGITAL AUDIO OUT (OPTICAL) jack on your TV and the Digital Audio Input onthe Home Theatre.When following the connection above, the Optical jack only outputs 2 channel audio. You will only hear sound from theHome Theatre’s Front Left and Right speakers and the subwoofer. If you want to hear 5.1 channel audio, connect theDIGITAL AUDIO OUT (OPTICAL) jack on the DVD / Satellite Box (ie Anynet Device 1 or 2) directly to the Amplifier orHome Theatre, not the TV.Connect only one Home Theatre.You can connect an Anynet+ device using the HDMI 1.3 cable. Some HDMI cables may not support Anynet+ functions.Anynet+ works when the AV device supporting Anynet+ is in the Standby or On status.Anynet+ supports up to 12 AV devices in total. Note that you can connect up to 3 devices of the same type.¦NNNNNNTV Anynet+Device 2Anynet+Device 3Anynet+Device 1Anynet+Device 4HDMI 1.3 CableHDMI 1.3 CableHDMI 1.3 CableTV Anynet+ Device 1Anynet+ Device 2HDMI 1.3 CableAnynet+ Device 4Home TheatreOptical CableHDMI 1.3 CableAnynet+ Device 3HDMI 1.3 Cable[550_Aus]BN68-01895D-02Eng.indb 30 2009-09-16 �� 11:13:00