Samsung 5 series User Manual

Also see for 5 Series: Quick setup guide Quick setup guide Quick setup guide Quick start guide User manual

Contents

English - Anynet+ MenuThe Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the TV.Anynet+ Menu DescriptionView tV Anynet+ mode changes to TV broadcast mode.Select Device Shows the Anynet+ device list.Menu on Device Shows the connected device menus. E.g. If a DVD recorder is connected, the disc menu of theDVD recorder will appear.Device Operation Shows the play menu of the connected device. E.g. If a DVD recorder is connected, the playmenu of the DVD recorder will appear.Record Starts recording immediately using the recorder. (This is only available for devices that supportthe recording function.)Receiver Sound is played through the receiver.If more than one recording device is connected, they are displayed as (*recorder) and if only one recording device isconnected, it will be represented as (*device_name).tV Remote Control Buttons Available in Anynet+ ModeDevice type Operating Status Available ButtonsAnynet+ DeviceAfter switching to the device, when the menuof the corresponding device is displayed on thescreen.Numeric buttons ▲/▼/◄/►/ENtEREbuttonsColor buttons / ExIt buttonAfter switching to the device, while playing a file π (Backward search) / μ (Forward search) /∫ (Stop) / ∂ (Play) / ∑ (Pause)Device with built-intunerAfter switching to the device, when you arewatching a TV program z buttonAudio Device When Receiver is activated y / MUtE buttonThe Anynet+ function only works when the active source on the TV remote control is set to TV.The ∏ button works only while in the recordable state.You cannot control Anynet+ devices using the buttons on the TV. You can control Anynet+ devices only using the TV remotecontrol.The TV remote control may not work under certain conditions. If this occurs, reselect the Anynet+ device.The Anynet+ functions do not operate with other manufacturers’ products.The π, μ operations may differ depending on the device.RecordingYou can make a recording of a TV program using a Samsung recorder.Press the ∏ button.Recording begins. (Only when the Anynet+ enabled recording device is connected.)The current TV programme is recorded in the Watching TV status. If you are watching video from another device, the videofrom the device is recorded.You can also record the source streams by selecting Record after pressing the tOOLS button.Before recording, check whether the antenna jack is properly connected to the recording device.For the antenna connection to the recording device, refer to its user manual.❑N❑NNNNNN¦NNNN