Samsung 5 series User Manual
Also see for 5 Series: Quick setup guideQuick setup guideQuick setup guideQuick start guideUser manual
                                                                            | |
Contents
|
16 EnglishBasic FeaturesAudio Language t(digital channels only)Change the default value for audio languages.The available language may differ depending on the✎ broadcast.Multi-Track Sound (MTS)(analog channels only)Mono■ : Choose for channels that arebroadcasting in mono or if you are havingdifficulty receiving a stereo signal.Stereo■ : Choose for channels that arebroadcasting in stereo.SAP■ : Choose to listen to the Separate Audio Program,which is usually a foreign-language translation.Depending on the particular program being broadcast,✎ you can listen to Mono, Stereo or SAP.Auto Volume (Off / Normal / Night)To equalize the volume level on each channel, set to Normal.Night■ : This mode provides an improved soundexperience compared to Normal mode, making almostno noise. It is useful at night.Speaker Select(External Speaker / TV Speaker)A sound echo may occur due to a difference in decodingspeed between the main speaker and the audio receiver.In this case, set the TV to External Speaker.When✎ Speaker Select is set to External Speaker, thevolume and MUTE buttons will not operate and thesound settings will be limited.When✎ Speaker Select is set to External Speaker, youshould use these settings.TV speaker: Off External speaker: OnxWhen✎ Speaker Select is set to TV Speaker, youshould use these settings.TV speaker: On External speaker: OnxIf there is no video signal, both speakers will be mute.✎SPDIF OutputSPDIF (Sony Philips Digital Interface) is used to provide digitalsound, reducing interference going to speakers and variousdigital devices such as an A/V Receiver/Home theater.Audio Format■ : During the reception of a digital TVbroadcast, you can select the Digital Audio output(SPDIF) format from the options PCM or Dolby Digital.By connecting to 5.1ch speakers in a dolby✎ digital setup, maximize your interactive 3D soundexperience.Audio Delay■ : Correct audio-video sync problems, whenwatching TV or video, and when listening to digital audiooutput using an external device such as an AV receiver(0ms ~ 250ms).FM TransmitterYou can listen to TV sound from FM receiver speaker bytransmitting audio signals by FM frequencies.Connecting a FM TransmitterNot available in some locations.✎ You can listen to TV sound from FM receiver speakerby transmitting audio signals by FM frequencies.For more detailed information, refer to✎ “FM TransmitterSetup”. (P. 29)Insert FM Transmitter Module into the Socket which islocated at the side of TV.FM Transmitter (Off / On)■ : Turns FM transmitter on/off.FM Frequency■ : Sets FM transmitter frequency.Sound Reset (OK / Cancel)Reset all sound settings to the factory defaults.Setup MenuSetting the Time¦MENUO m → Setup → Time → ENTERETimeClock■ : Setting the clock is for using various timerfeatures of the TV.The current time will appear every time you pressO the INFO button.If you disconnect the power cord, you have to set✎ the clock again.Clock Mode: Set up the current time manually orautomatically.Auto– : Set the current time automatically using thetime from the digital channel.The antenna must be connected in order to set✎ the time automatically.FAV.CHMEDIA.PP.MODES.MODEP.SIZECCMTSSLEEPTOOLSFM TransmitterTV Side Panel |
Related manuals for Samsung 5 Series
manualsdatabase
Your AI-powered manual search engine