Wiringthe Mains Power Supply Plug(UKOnly)IMPORTANT NOTICEThe mains lead on this equipment is supp lied with a moulded plug incorporating a fuse. The value of the fuse is indicated on the pin faceofthe plug and, if it requires replacing, a fuse approvedtoBSI1362ofthe same rating must be used.Never use the plug with the fuse cover omitted if the cover is detachable. If a replacement fuse cover is required, it must beofthe samecolour as the pin faceofthe plug. Replacement covers are available from your dealer.If the fitted plug is not suitable for thepowerpointsinyour houseorthe cable is not long enoughtoreach a power point, you shouldobtain a suitable safety approved extension leadorconsult your dealer for assistance. However, if there is no alternative buttocut off theplug, remove the fuse and then safely dispose of the plug.Do NOT connect the plug to a mains socket as there is a risk of shock hazard from the bared flexible cord.IMPORTANTThe wires in the mains lead are coloured in accordance with the following code:BLUE - NEUTRAL BROWN -LIVEAs these colours may not correspondtothe coloured markings identifying the terminalsinyour plug, proceed as follows :The wire coloured BLUE must be connected to the terminal marked with the letter Norcoloured BLUE or BLACK. The wire colouredBROWN must be connectedtothe terminal marked with the letterLorcoloured BROWN or RED.WARNING:DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL, WHICHISMARKED WITH THE LETTER E OR BY THE EARTH SYMBOL, OR COLOURED GREEN OR GREEN AND YELLOW.Russia Only - PCT Notice~~AB57MPRIICompliance (MPRIIapplied modelonly)This monitor complies with SWEDA C(MPRII)recommendations for reduced electric and magnetic fields.