Samsung 5+ Series User Manual

Also see for 5+ SERIES: Quick setup guide Quick setup guide Quick setup guide Quick setup guide Quick setup guide

Contents

edit name

English - 7Plug & Play (Initial Setup)When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings.Press the POWERP button. Plug & Play is available only when the Source is set to TV.✎ Before turning on the TV, make sure the antenna cable is connected (p. 6).✎ To return to the previous step, press the Red button.1 Selecting a language Press the ▲ or ▼ button, then press the ENTERE button.Select the desired OSD (On Screen Display) language.2 Selecting StoreDemo or Home UsePress the ◄ or ► button, then press the ENTERE button.Select the Home Use mode. Store Demo mode is for retailenvironments.To return the unit’s settings from Store Demo to Home Use(standard): Press the volume button on the TV. When you see thevolume OSD, press and hold MENU for 5 sec.Store Demo is only for shop display. If you select it, severalfunctions are not able to use. Please select Home Use when youwatch at home.3 Selecting an area Press the ENTERE button. Select the appropriate area by pressing the ▲ or ▼button.Press the ENTERE button to confirm your choice.4 Setting the Clock Press the ENTERE button.Set the Date and Time.✎ You can also set the Date and Time by pressing the number buttons on theremote control.5 Memorising Channels The channel search will start automatically. For more information, refer to Channel→ Auto Tuning in the e-Manual.6 Network Settings orWatch TVIf you want to watch a broadcast program, select Enjoy your TV. You can setup the Network connection. If you want to set up the network, select NetworkSettings. The Network Settings screen will appear. For more detailed information,refer to “Network Connection” in the e-Manual.If You Want to Reset This Feature...Select System - Plug & Play (Initial Setup). Enter your 4 digit PIN number. The default PIN number is “0-0-0-0.”If you want to change the PIN number, use the Change PIN function.You should do Plug & Play (MENU → System) again at home although you did in shop.✎ If you forget the PIN code, press the remote control buttons in the following sequence in Standby mode,which resets the PIN to “0-0-0-0”: MUTE → 8 → 2 → 4 → POWER (on).PPOWER