Samsung 650 6 series User Manual
Also see for series 6 650: User manualUser manualUser manual
                                                                                                                                | |
Contents
|
English - 64Troubleshooting for Anynet+Problem Possible SolutionAnynet+ does not work. Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices only.Connect only one receiver (home theater).Check if the Anynet+ device power cord is properly connected.Check the Anynet+ device’s Video/Audio/HDMI 1.3 cable connections.Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu.Check whether the TV remote control is in TV mode.Check whether it is Anynet+ exclusive remote control.Anynet+ doesn’t work in certain situations. (Searching channels, Operating Media Play, Plug &Play, etc.)When connecting or removing the HDMI 1.3 cable, please make sure to search devices again orturn your TV off and on again.Check if the Anynet+ Function of Anynet+ device is set on.I want to start Anynet+. Check if the Anynet+ device is properly connected to the TV and check if the Anynet+ (HDMI-CEC) is set to On in the Anynet+ Setup menu.Press the TV button on the TV remote control to switch to TV. Then press the TOOLS button toshow the Anynet+ menu and select a menu you want.I want to exit Anynet+. Select View TV in the Anynet+ menu.Press the SOURCE button on the TV remote control and select a device other than Anynet+devices.Press z, CH LIST, PRE-CH, and FAV.CH to change the TV mode. (Note that thechannel button operates only when a tuner-embedded Anynet+ device is not connected.)The message ‘Connecting toAnynet+ device...’ appears onthe screen.You cannot use the remote control when you are configuring Anynet+ or switching to a viewmode.Use the remote control when the Anynet+ setting or switching to view mode is complete.The Anynet+ device does notplay.You cannot use the play function when Plug & Play is in progress.The connected device is notdisplayed.Check whether or not the device supports Anynet+ functions.Check whether or not the HDMI 1.3 cable is properly connected.Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu.Search Anynet+ devices again.You can connect an Anynet+ device using the HDMI 1.3 cable only. Some HDMI cables may notsupport Anynet+ functions.If it is terminated by an abnormal situation such as disconnecting the HDMI cable or power cordor a power failure, please repeat the device scan.The TV program cannot berecorded.Check whether the antenna jack on the recording device is properly connected.The TV sound is not outputthrough the receiver.Connect the optical cable between TV and the receiver.¦ |
Related manuals for Samsung series 6 650
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine